Tof S. L/R Asy Replacement - Fujitsu DL7600 Maintenance Manual

(41) TOF S. L/R ASY replacement

Removal
1. Remove the upper cover.
2. Remove the screws securing the upper guide F on its left and right, and release it to the front.
3. Remove the print head.
4. Disconnect the TOFL/R cable from the carriage PC board.
5. Remove the small screws by precision driver, and remove the TOFL/R sensor.
Installation
1. Install the TOFL/R sensor assembly by reversing the removal procedure.
2. After installation, the following adjustments are required:
- TOF sensor's voltage adjustment
- Top-of-forms adjustment (factory use)
- Skew detection value adjustment
TOF S.R ASY
TOF S.L ASY
Screw
Screw
Figure 4.64 TOF S. L/R ASY replacement
94