Table of Contents
Advertisement
Periodic Routine Maintenance
4-6
Replacement
To replace the developer unit or drum unit, follow these steps:
Caution:
Be careful not to scratch and touch the green surface of the drum unit.
1. Open the upper door. Lift
the center portion under
the stopper of the upper
door to open it.
2. Remove the print unit.
Pull the top center of the
print unit at a 45° angle
towards the front of the
printer.
When the print unit begins
to move, gently lift it up
and out.
Place the print unit on a
level, steady place.
3. When you replace the
developer unit, unhook
the shutter of the drum
unit to close it.
User's Manual
Advertisement
Table of Contents
