Fujitsu DL7600 Maintenance Manual page 135

Sample HEX-DUMP
4. Exit the HEX-DUMP function.
Exit the HEX-DUMP function in either of the following ways:
• To remain in setup mode, press the LF/FF button. The <<FUNCTION>> menu is then reprinted.
For details on other functions, see other sections in this chapter.
• To return to online normal mode, press the ONLINE button. If you press the ONLINE button while the hex
dump is printing, The printer immediately switches to normal online mode. Any data that was sent to the printer
but not printed is discarded (cleared).
You can also enter hex dump mode, by turning off the printer, and then turning the printer back on while
simultaneously pressing the ONLINE button and the LF/FF button until the printer beeps.
135