Fujitsu DL7600 Maintenance Manual page 149

(3) Cut sheet paper feed operation
Figure 5.14 shows the paper feed mechanism for cut sheet paper.
The cut sheet paper placed on the paper table, which is not shown in the figure below, against the first roller in the
cut sheet feeding slot is fed between the first transport roller and first nip roller, which are driven by the LF motor,
and pulled by the second transport roller and second nip roller.
Entrance of front
paper pass
PSS sensor
(photo reflector)
Nip roller
DV Roller
Front eject
Load
Figure 5.15 Cut sheet feed mechanism
DV Roller
PL roller
Eject
149
Nip roller
Entrance of rear paper pass