Lf Timing Belt Replacement - Fujitsu DL7600 Maintenance Manual

(46) LF Timing belt replacement

Removal
4.
Remove the upper cover.
2. Remove the printer mechanism assembly.
3. Put the mark to memory the LF tension bracket position. .
4. Remove the LF tension bracket and remove the LF belt.
Installation
4.
Install the LF timing belt by reversing the removal procedure.
2. Install the LF tension bracket while aligning it with the marking and secure it with a screw.
Note:
After installation is finished, the following adjustment is required:
LF belt tension
LF timing belt
LF tension bracket
Figure 4.70 LF Timing Belt replacement
Screw
100