Consumables And Replacement Cycles - Fujitsu SP-1120 Operator's Manual

Chapter 6 Replacing the Consumables

6.1 Consumables and Replacement Cycles

The following table shows the consumables used for the
scanner.
Name Part No.
ROLLER SET PA03708-
0001
 Brake roller
 Pick roller
Consumables need to be replaced periodically. It is
recommended that you keep a stock of new consumables for
replacement before it reaches the end of its life. The scanner
Suggested Replacement
records the number of sheets scanned after replacing the
Cycle
consumables, which allows you to check the status of the
100,000 sheets or one year
consumables.
For details, refer to
(page
Note that the suggested replacement cycles are references for
using A4 (80 g/m
as these cycles vary depending on the type of documents
scanned and how often the scanner is used and cleaned.
To purchase the consumables, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service provider.
"8.4 Settings Related to Sheet Counters"
96).
2
(20 lb) wood-free or wood-containing paper,
HINT
Only use the specified consumables.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
58