Level 1 Maintenance - Fujitsu DL7600 Maintenance Manual

4.8 Level 1 Maintenance

Level 1 maintenance includes only cleaning and lubrication. These can be performed without
removing covers although Figure 4.3 shows the printer with the covers removed.
Check the DL7600 printer inside for paper particles, dust, and dirt, and remove these as explained below. After
cleaning, lubricate moving parts.
Location
Paper path
Top of print head
Card guide
Platen surface
Stay shaft
*1 If paper becomes smeared or dirty, clean the platen. Use a very small amount of alcohol and wipe with clean
cloth.
Stay shaft
Cleaning procedure
Remove paper particles and dirt
Remove ribbon debris, paper scraps, and other contaminants.
Remove ribbon debris, paper scraps, and other contaminants.
Clean the surface with soft cloth
Remove dust from the surface of the shaft and clean it with
soft cloth.
Figure 4.3 Cleaning and lubrication
Print head
Card guide
42
Remarks
*1
Refer to the lubrication
specifications.