Soundproof Cover Replacement - Fujitsu DL7600 Maintenance Manual

(5) Soundproof cover replacement

Removal
1. After opening the soundproof cover and adjusting it to a tilted position, remove the soundproof cover lifting
it to separate the left and right protrusions on the soundproof cover ends from the grooves on the cover.
Installation
1. Insert the left and right protrusions on the paper table ends into the grooves on the cover as
shown in the following figure.
2. Set the paper table in the normal position.
Figure 4.12 Soundproof cover removal
Figure 4.13 Soundproof cover Instillation
51