Fujitsu DL7600 Maintenance Manual page 55

Installation
1. Remove the new ribbon cassette from its package. Push in the two ribbon release tabs. The tabs snap into
the cassette and the ribbon feed mechanism engages.
2. Remove the ribbon guide (green part) from the ribbon cassette.
Don't turn the ribbon feed knob before installation.
3. Put the green ribbon guide into the space in front of print head. And then place the mounting pins (both side of
ribbon cassette) on the slot of the printer cover. And then push the ribbon cassette so that the ribbon
cassette is installed vertically.
Mounting pin
Print head
Slot
Figure 4.18 Ribbon cassette installation
Space
Ribbon guide
Figure 4.19 Ribbon cassette installation
Mounting pin
Slot
55
Push the ribbon cassette
until it clicks.