Spacing Operation - Fujitsu DL7600 Maintenance Manual

5.2.1.2 Spacing operation

Figure 5.3 shows spacing mechanism.
Spacing operation is performed by the space motor (4-phase pulse motor) mounted on the right side of the side
frame.
The drive pulley used to move the carriage is mounted on the top of the space motor, and the timing belt is put on
the drive pulley.
The carriage with the print head is guided by the stay shaft parallel to the platen and the upper angle secured to the
frame so that the carriage can move parallel to the platen.
The timing belt is connected to the carriage by the belt clamper, and the carriage moves in parallel to the platen to
the left and right in accordance with the space motor rotation.
Figure 5.3 Spacing mechanisms
140