Rear stay screws
4.8 Level 1 Maintenance
Level 1 maintenance includes only cleaning and lubrication. These can be performed without removing
covers although Figure 4.3 shows the printer with the covers removed.
Check the DL7600 printer inside for paper particles, dust, and dirt, and remove these as explained below. After
cleaning, lubricate moving parts.
Location
Paper path
Top of print head
Card guide
Platen surface
Stay shaft
Print head
Upper stay screws
Front stay screws
Figure 4.2 Parts That must not be disassembled
Cleaning procedure
Remove paper particles and dirt
Remove ribbon debris, paper scraps, and other contaminants.
Remove ribbon debris, paper scraps, and other contaminants.
Clean the surface with soft cloth
Remove dust from the surface of the shaft and clean it with
soft cloth.
Card Guide
Space motor pulley
32
Remarks
*1
Refer to the lubrication
specifications.