Counters - Deif CGC 400 Reference Book

CGC 400 DRH 4189340786 UK
Condition
MAINS FAILURE IN
###s
MAINS U OK DEL ####s
MAINS f OK DEL ####s
Hz/V OK IN ###s
COOLING DOWN ###s
COOLING DOWN
GENSET STOPPING
EXT. STOP TIME ###s
EXT. START ORDER

7.24 Counters

Counters for various values are included, and some of these can be adjusted if necessary, for instance if the
unit is installed on an existing genset or a new circuit breaker has been installed.
The table shows the adjustable values and their function in menu 6100:
Description
6101 Running time Offset adjustment of the total running hours
counter.
6102 Running time Offset adjustment of the total running thou-
sand hours counter.
6103 GB opera- Offset adjustment of the number of genera-
tions tor breaker operations.
6104 MB opera- Offset adjustment of the number of mains
tions breaker operations.
6105 kWh reset Resets the kWh counter.
6106 Start at- Offset adjustment of the number of start at-
tempts tempts.
DEIF A/S
Comment
Frequency or voltage measurement is outside the lim-
its
Mains voltage is OK after a mains failure
Mains frequency is OK after a mains failure
The voltage and frequency on the genset is OK
Cooling-down period is activated
Cooling-down period is activated and infinite
This info is shown when cooling down has finished
A planned AMF sequence is activated
Function
Additional functions
The timer shown is
the Mains failure de-
lay.Text in mains units
The timer shown is
the Mains OK delay
The timer shown is
the Mains OK delay
When the timer runs
out it is allowed to op-
erate the generator
breaker
Cooling down timer is
set to 0.0 s
There is no failure on
the mains during this
sequence
Comment
Counting when the running feedback
is present.
Counting when the running feedback
is present.
Counting at each GB close command.
Counting at each MB close command.
Automatically resets to OFF after the
reset. The reset function cannot be left
active.
Counting at each start attempt.
Page 86 of 96