Access Lock - Deif CGC 400 Reference Book

CGC 400 DRH 4189340786 UK Additional functions
t
RUN
Run. feedback
t
Alarms active
The timer is ignored if digital running feedback is used.

7.6 Access lock

The purpose of access lock is to deny the operator the possibility to configure the unit parameters and
change the running modes from the display and digital inputs. When activated the display will say "Access
lock" when pushing the display buttons affected by the access lock, please see the table below.
The input to be used for the access lock function is defined in the PC utility software (USW).
Access lock will typically be activated from a key switch installed behind the door of the switchboard cabinet.
DEIF A/S Page 54 of 96