HP 316095-B21 Installation Manual page 73

Edge switch 2/32
Hide thumbs Also See for 316095-B21:
Table of Contents

Advertisement

1.
Ensure that the Edge Switch is defined to the HAFM application or defined to the HAFM
appliance (see
"Setting up the HAFM
2.
Ensure that the preferred domain ID for the Edge Switch is unique and does not conflict with the
ID of another Edge Switch or Director participating in the fabric.
To change the domain ID, see
• If the domain ID must be changed from the HAFM interface, see
operating
parameters" on page 50.
• If the domain ID must be changed from the Element manager, see
parameters" on page 82.
3.
Ensure that the R_A_TOV and E_D_TOV values for the Edge Switch are identical to the values for
all Edge Switches participating in the fabric.
To change the values, see
4.
Route a multimode or single-mode fiber-optic cable (depending on the type of SFP transceiver
installed) from a customer-specified E_Port of the Edge Switch to the Edge Switch.
5.
Connect the switch-attached fiber-optic cable to the port SFP transceiver.
6.
If the Edge Switch is managed by an attached HAFM appliance, go to
is managed by the Embedded Web Server interface:
a. Select View at the left side of the window.
The View window opens with the Switch tab selected and displayed.
b. At the View window, click the Port Properties tab.
The Port Properties page is displayed with 0 selected, and port information listed for port 0.
c. Select the port number of the port used to make this ISL connection.
d. Ensure that the Operational State box displays Online and the Reason box displays N/A or
is blank.
If an ISL segmentation or other problem is indicated, see the
Edge Switch service manual to isolate the problem. If no problems are indicated,
connectivity tasks are complete.
7.
At the HAFM appliance's Product view, double-click the Edge Switch icon.
The Hardware view for the selected Edge Switch is displayed.
appliance" on page 40).
"Configuring Edge Switch operating
"Configuring fabric operating
parameters" on page 50.
"Configuring Edge Switch
"Configuring Edge Switch
parameters" on page 53.
step
7. If the Edge Switch
Edge Switch 2/32 installation guide
73

Advertisement

Table of Contents
loading

Table of Contents