Laser Safety Warning; Certification And Classification Information; Laser Product Label; International Notices And Statements - HP 316095-B21 Installation Manual

Laser safety warning

WARNING!
• Do not try to open the laser device enclosure. There are no user-serviceable components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser device other than
those specified herein.
• Allow only HP-authorized service technicians to repair the laser device.

Certification and classification information

This product contains a laser internal to the fiber optic (FO) transceiver for connection to the Fibre
Channel communications port.
In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter
J. A label on the plastic FO transceiver housing indicates the certification.
Outside the USA, the FO transceiver is certified as a Class 1 laser product conforming to the
requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment
11:1996 and Amendment 2:2001.

Laser product label

The optional label in
device.
Figure 64

Class 1 laser product label

International notices and statements

Canadian notice (avis Canadien)

Class A equipment

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
To reduce the risk of exposure to hazardous radiation:
Figure 64 or equivalent may be located on the surface of the HP supplied laser
This optional label indicates that the product is classified as
a CLASS 1 LASER PRODUCT. This label may appear on the
laser device installed in your product.
Edge Switch 2/32 installation guide 109