EAN/JAN-13
EAN/JAN-13 On/Off
* On
Convert UPC-A to EAN-13
When UPC-A Converted to EAN-13 is selected, UPC-A barcodes are converted to
13 digit EAN-13 codes by adding a zero to the front. When Do not Convert UPC-A is
selected, UPC-A codes are read as UPC-A.
UPC-A Converted to EAN-13
EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
* On
120
<Default All EAN/JAN Settings>
* UPC-E1 Off
Off
* Do not Convert UPC-A
Vuquest 3320g User Guide