Upc-E1; Ean/Jan-13; Convert Upc-A To Ean-13 - Honeywell 1602-B User Manual

5 Digit Addenda On

UPC-E1

Most U.P.C. bar codes lead with the 0 number system. For these codes, use
that lead with the 1 number system, use the UPC-E1 On selection. Default = Off.
UPC-E1 On

EAN/JAN-13

EAN/JAN-13 On/Off

Convert UPC-A to EAN-13

When UPC-A Converted to EAN-13 is selected, UPC-A bar codes are converted to 13 digit EAN-13 codes by adding a
zero to the front. When Do not Convert UPC-A is selected, UPC-A codes are read as UPC-A.
UPC-A Converted to EAN-13
7 - 24
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
<Default All EAN/JAN Settings>
* On
* 5 Digit Addenda Off
UPC-E0 (page 7-22). If you need to read codes
* UPC-E1 Off
Off