9.8
Applied standards and directives
Property
EMC (relevant for CE)
IEC/EN 61000-6-2
IEC/EN 61000-6-4
IEC/EN 61000-6-3
5.7" devices only without cable at the USB
host and USB device interfaces
Does not apply to devices with a Smart-
Wire-DT master interface
EMC (for marine approvals)
2004/30/EU
Explosion protection (relevant for CE)
ATEX 94/9/EG: Zone 22, Category 3D (II 3D Ex tc IIIC T70°C IP6x):
IEC/EN 60079-0
IEC/EN 60079-31
safety
IEC/EN 60950
UL 60950 (only 3.5" devices)
UL 508
Product standards
EN 50178
IEC/EN 61131-2
Tab. 40 Applied standards and directives
Fig.. 42 Ethernet cable, double loop through ferrite
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
9.8 Applied standards and directives
XV-102
Interference immunity for industrial environments
Emitted interference for industrial environments
Devices meeting this standard may not be used in
residential areas
Interference immunity for residential areas, commer-
cial and light industrial areas as well as small busi-
nesses
Ethernet cable with double loop through ferrite.
See Fig. 40 as per table
Electromagnetic Compatibility (EMC) Directive
Explosive atmospheres: Equipment - General
requirements
Explosive atmospheres: Equipment dust ignition
protection by enclosure "t"
Safety of Information Technology Equipment
Industrial Control Equipment
(technical conditions for acceptance by UL
Chapter 5.2.1, 25)
Electronic equipment for use in power installations
Programmable logic controllers: Equipment require-
ments and tests
9 Technical data
77