Ethernet - Eaton XV-102 Operating Instructions Manual

5.3.5
Cable

Ethernet

Fig.. 14 Ethernet interface (RJ45 socket)
LED Signal
ACT (yellow) flashes
LINK (green) lit
Tab. 11 Control LEDs of the Ethernet interface
Use screened twisted pair cable (STP) for networking:

For device to device connection (crossover cable)

For connecting to the hub/switch: 1:1 patch cable

Maximum cable length: 100 m.

CAUTION
Forces on the Ethernet interface
Communications may be affected, and the connection's mechanical components
may be damaged, if the Ethernet interface is subjected to strong vibrations or the
RJ45 plug-in connection is subjected to pulling.
Protect the RJ45 plug-in connection from strong vibrations.

Protect the RJ45 plug-in connection from tensile forces at the socket.

HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
LINK ACT
Meaning
Ethernet is active (data traffic)
Active network is connected and detected
5 Installation
5.3 Interfaces
35