Starting The Device; Switch Off The Device - Eaton XV-102 Operating Instructions Manual

6 Operation

6.2 Starting the device

6.2
6.3
58
Starting the device
1 Energize the device.
The device will boot.

2 If the device does not boot up and/or if an error message appears while starting (booting) the
device, see Chapter 7.4 Troubleshooting,  63
3 Complete the following steps after initial commissioning ( Document «System Description
Windows CE MN05010007Z (operation of the Windows CE operating system on touch displays)»)
3.1 Adjust the system settings of the device.
3.2 Install the required application programs.

The lifespan of the backlight can be increased by reducing the brightness ( Document
«System Description Windows CE MN05010007Z (operation of the Windows CE operat-
ing system on touch displays)»).

Switch off the device

1 De-energize the device.
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com