Ip Degrees Of Protection On The Device; Approvals And Declarations - Eaton XV-102 Operating Instructions Manual

9 Technical data

9.6 IP degrees of protection on the device

9.6
9.7
76
IP degrees of protection on the device
Property
Front
Rear side
Tab. 38 IP degrees of protection on the device

Approvals and declarations

Property
EMC
explosion safety
UL
Marine approvals
(shipping classification)
Tab. 39 Approvals and declarations
1) Zone 22, category 3D:
- IP5x for group IIIB devices (nonconductive dust)
- IP6x for group IIIC devices (conductive dust)
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
XV-102
IP65, enclosure type 4X (indoor use only)
Required number of retaining brackets and
threaded pins for mounting:
3.5" devices: 4 pieces each

5.7" devices: 6 pieces each

7.0" devices: 8 pieces each

IP20, enclosure type 1
XV-102
2004/108/EEC
II 3D Ex tc IIIC T70°C IP6x (ATEX 94/9/EC):
1)
Zone 22, Category 3D

Required number of retaining brackets and
threaded pins for mounting:
3.5" devices: 4 pieces each

5.7" devices: 6 pieces each

7.0" devices: 8 pieces each

Devices delivered with gasket adhesively bond-

ed in place:
UL 508, File no. E205091
3.5" devices delivered with the gasket not in

place already.
UL 60950, File no. E208621
Required number of retaining brackets and
threaded pins for mounting:
3.5" devices: 4 pieces each

5.7" devices: 6 pieces each

7.0" devices: 8 pieces each

Type approval – provided that a radio interfer-

ence suppression filter for the device is installed
in the wiring and that the communication cables
are screened.
DNVGL-CG-0039, since 11/2015
Certificate No.: TAA00000NC