Smartwire-Dt Master; Additional Documentation For Devices With Smartwire-Dt Master Interface - Eaton XV-102 Operating Instructions Manual

5.3.8
5.3.8.1

SmartWire-DT Master

The SmartWire-DT Master interface is not galvanically isolated.
CAUTION
Not galvanically isolated SmartWire-DT system
The device may be damaged by potential differences.
Provide a common star point for the earth wiring.


Additional documentation for devices with SmartWire-DT Master interface

In addition to this document, the following documents are required to build a SmartWire-DT network, to
install the network at the SmartWire-DT Master interface and to operate the network:
MN05006002Z SmartWire-DT The System Manual

(System description, engineering, installation, commissioning, and diagnostics for a SmartWire-DT
network)
MN05006001Z SmartWire-DT Module Manual IP20

(surface mounting, engineering, installation, etc. for the individual SmartWire-DT modules)
MN120006 SmartWire-DT Module Manual IP67

(surface mounting, engineering, installation, etc. of the single SmartWire-DT slaves,
I/O modules IP67)
MN04802091Z User Manual XSoft-CODESYS: PLC programming XV100

(Use of the PLC programming tool XSoft-CoDeSys-2 and the PLC runtime system for the XV100
device type with Windows CE)
The documents can be downloaded from:
www.eaton.eu/doc (search for the document number using the search field on the home page)

www.eaton.com (search for the document number using the search field on the home page)

www.eaton.eu/swd

HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
5 Installation
5.3 Interfaces
37