3 Safety regulations
3.3 Mandatory requirements, personnel requirements
3.3.6
18
Prerequisites for proper operation
In order for the device to be able to meet the contractually stipulated terms, the following must be
observed:
Only qualified personnel should be allowed to work with the device.
These persons must have read the Operating manuals and must observe the requirements
described.
The ambient conditions stated must be observed. See chapter 9.9 Environmental conditions, 78
Maintenance work must be carried out correctly.
Potentially explosive atmosphere, Zone 22:
The ground resistance of accessible metal parts must be less than 10
We assume no liability for damages, consequential damages, and/or accidents caused by the following:
Failure to follow occupational health and safety rules and standards
Device failures or function disturbances
Improper use and/or handling
Failure to observe the Operating manuals
Alterations, changes, and repairs to the device
Repairs, see Chapter 7.3.1 Repairs, 62.
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
9
ohms.