Operation; Safety Regulations - Eaton XV-102 Operating Instructions Manual

6
6.1

Operation

Safety regulations


Read Chapter 3 Safety regulations,  15, before working with the device. This contains
important information for your personal safety.
CAUTION
Sensitive resistive touch surface
Damage to the resistive touch due to the use of pointed or sharp objects.
Only activate the resistive touch with your finger or a stylus.

When wearing gloves, ensure that these are clean. They must not be covered

with abrasive dust or sharp particles.
CAUTION
Condensation in/on the device
If the device is or was exposed to climatic changes (temperature fluctuation, air hu-
midity) moisture can form on or in the device (device condensation). In this case,
there is a risk of short-circuit.
The device must not be switched on when device condensation is present.

If the device has condensation in or on it, or if the device has been exposed to

temperature fluctuations, let the device settle into the existing ambient air tem-
perature before switching it on (do not expose the device to direct thermal radia-
tion from heating appliances).
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
6 Operation
6.1 Safety regulations
57