Operating And Indication Elements Of The Smartwire-Dt Master Interface - Eaton XV-102 Operating Instructions Manual

5 Installation
5.3 Interfaces
5.3.8.2
38

Operating and indication elements of the SmartWire-DT master interface

Fig.. 17 SmartWire-DT master interface
Element
A POW/AUX interface
B POW-LED
C SWD-LED
D Config-LED
E Configuration button
F SWD Interface
Tab. 12 Operating and indication elements of the SmartWire-DT master interface
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
Function
Power supply interface for SmartWire-DT
( Chapter 5.3.8.3,  39)
Lit if the SmartWire-DT network is supplied with current.
Indicates whether the physical configuration of the SmartWire-DT
network matches the target configuration stored in the device. The
configurations are compared every time the power supply is switched
on ( Chapter 5.3.8.5,  41).
Indicates whether the SmartWire-DT master project configuration
defined in the PLC matches the SmartWire-DT network target configu-
ration stored in the device. The configurations are compared every time
the power supply is switched on ( Chapter 5.3.8.5,  41).
Configure SmartWire-DT network.
SmartWire-DT interface ( Chapter 5.3.8.4,  40)