Marine Approvals - Eaton XV-102 Operating Instructions Manual

2 Description of device

2.7 Marine approvals

2.7
14
Marine approvals
Obtained type approvals
The touch displays HMI/PLC XV-102 have been granted the required ship-
ping classification by Det Norsk Veritas / Germanischer Lloyd (DNV GL)
DNVGL-CG-0339 type approval, November 2015 edition,

"Environmental test specification for electrical, electronic and programmable equipment and
systems"
Certificate No.: TAA00000NC
Location classes
Temperature B - Ambient air temperature: 0°C to +55°C
B - Relative humidity up to 100 % at all relevant temperatures.
Humidity
Vibration A - Bulkheads, beams, deck, bridge, Acceleration amplitude: 0.7 g
EMC B* - All locations (including bridge and open deck)
Input Required protection according to DNV-GL Rules shall be provided upon
installation on board
* Filters / Ferrites maybe required to fulfil. See installation restrictions
Installation restrictions
Installation and commissioning as indicated in the documentation for the touch display

Screened communication cables improve EMC behavior

PE connection of communication cables improve EMC behavior

(e.g. earth-connection kit: EATON ZB4-102-KS1)
Location class
Power
supply
Ethernet
SWD
communication
EMC B
SWD power
supply
RS485
RS232

5.2.2 Conditions for marine approval (DNV GL),  25
5.3.3 Section Radio interference suppression filter for the 24 V DC
supply,  33
5.4.2 Screening the communication cables used,  56
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
interface
Place interference filter
Place the ferrite core or snap-together ferrites at a max.
distance of 20 cm from the external device plug.
Installation