5 Installation
5.3 Interfaces
5.3.8.2
36
Operating and indication elements of the SmartWire-DT master interface
Fig.. 18 SmartWire-DT master interface
Element
A POW/AUX interface
B POW-LED
C SWD-LED
D Config-LED
E Configuration button
F SWD Interface
Tab. 12 Operating and indication elements of the SmartWire-DT master interface
Touch display XV-102 10/2020 MN04802004Z-EN Eaton.com
Function
Power supply interface for SmartWire-DT
( Chapter 5.3.8.3, 37)
Lit if the SmartWire-DT network is supplied with current.
Indicates whether the physical configuration of the SmartWire-DT
network matches the target configuration stored in the device. The
configurations are compared every time the power supply is switched
on ( Chapter 5.3.8.5, 39).
Indicates whether the SmartWire-DT master project configuration
defined in the PLC matches the SmartWire-DT network target configu-
ration stored in the device. The configurations are compared every time
the power supply is switched on ( Chapter 5.3.8.5, 39).
Configure SmartWire-DT network.
SmartWire-DT interface ( Chapter 5.3.8.4, 38)