1. INTRODUCTION
1.15
The Settings Menu
The [Settings] button gives you access to the user profiles and the [Settings] menu.
The [Settings] menu has facilities for screenshot management, file management, di-
agnostic tests and customizing. See chapter 23.
[Settings]
button
1.16
How to Manage User Profiles
Ten sets of [Chart Display], [Symbol Display] and [Chart Alert] menu settings can be
stored in user profiles for later retrieval.
1.16.1
How to create a profile
1. Set the [Chart Display], [Symbol Display] and [Chart
Alert] menus as desired.
2. Click [ ] on the Status bar then click [Manage Pro-
file].
3. Select a profile number from the "Profile" drop-down
list.
Note: Profiles 06-10 are disabled in the default set-
ting. To enable a disabled profile, select the profile
to enable from the "Profile" drop-down list then uncheck [Disable this profile].
4. Click [Save Current Settings].
1.16.2
How to disable a profile
Select the profile to disable from the "Profile" drop-down list then check [Disable this
profile]. The profile enabled at section 1.16.4 cannot be disabled.
1.16.3
How to restore default settings to a profile
Select the applicable profile from the "Profile" drop-down list then click [Restore De-
fault Settings].
1.16.4
How to activate a profile
Click [
] on the Status bar then click the profile number to
activate.
1-16
Profiles
(enabled)