Sensor Type
B
C
E
T
RTD (PT 100)
Note: Some following functions or instructions which the M3511A
※
doesn't support or provide are colored green.
3.8.1 Thermocouple Measurements
Connect the thermocouple sensor to the TC INPUT jack on the front panel.
The difference between each type is subject to sensors.
How to measure thermocouple
1. To measure thermocouple must be via a purposive sensor as shown
in Figure 3-3.
2. Press SHIFT + TEMP buttons to select thermocouple measurement.
3. Configure the thermocouple type by using the CONFIG button (refer
to 4.1.7) or skip this step to use the default settings.
4. Observe and take readings on the display.
Temperature
Range(°C)
600~1820
0~2316
-250~1000
-250~400
-200~850
Figure 3-3
36 36 36 36
Temperature
Range(°F)
1112~3308
32~4200.8
-418~1832
-418~752
-328~1562