Scpi Compliance Information - Picotest M3510A User Manual

*SRE <enable value>
Enable bits in the Status Byte enable register.
*SRE?
Query the Status Byte enable register. The multimeter returns a
decimal value which corresponds to the binary-weighted sum of all bits
set in the register.
*STB?
Query the Status Byte summary register. The *STB? command is
similar to a serial poll but it is processed like any other instrument
command. The *STB? command returns the same result as a serial
poll but the "request service" bit (bit 6) is not cleared if a serial poll
has occurred.
C.11 SCPI Compliance Information
This section encloses a list of commands that are device-specific to the
M3510A/11A. Although not included in the 1999.0 version of the SCPI
standard, these commands are compliant to the SCPI format and they
follow the syntax rules of the standard.
Many of the required SCPI commands are accepted by the multimeter
but aren't described in this manual for simplicity or clarity. Most of these
non-documented commands duplicate the functionality of a command
already described in this chapter.
MEASure:
CONTinuity?
DIODe?
SAMPle:
COUNt {<value>|MINimum|MAXimum}
COUNt? [MINimum|MAXimum]
[SENSe:]
FUNCtion "CONTinuity"
139 139
139 139