The Display - Picotest M3510A User Manual

3. Range Section
: Scrolls through options.
◁ ▷
: Changes the range while measuring or changes a digit when
△ ▽
setting parameters.
4. TC INPUT section
The terminals at the TC INPUT section provide thermocouple
temperature measurement. They come with built-in cold junction
compensation so no extra thermocouple adapter is needed.
5. Inserted Connections & Fuse Device:
HI & LO: Used for all measurements, except DC and AC current.
(Maximum input voltage: 1000V for voltage measurements. 200V for
4-wire measurement)
LO & I: Used for making DC and AC current measurements.
Two Front Fuses: Secures your Meter against damage of strong current
pulse. (Maximum current: 3A, 250V and 15A, 250V)

2.2.2 The Display

M3510A/11A has a dual-LCD-display for a better view. There are two
rows in the dual-display screen. The upper row (Primary) displays
readings and units. A maximum 11 characters are allowed for upper row
LCD display. The lower row (Secondary) displays range of the
measurements, condition, the secondary readings & units or information
about an ongoing configuration. A maximum 16 characters are allowed
for lower row LCD display. There are additional annunciators at upper
side and right side of the display screen for indicating the state or the
condition of an ongoing measurement. They are explained individually in
the following sections.
26 26 26 26