Capacitance Measurement; 2Nd Measurement - Picotest M3510A User Manual

3.9 Capacitance Measurement

The ranges for capacitance measurements in M3510A/11A are 1 nF, 10
nF, 100 nF, 1 µF, 10µF, 100µF, 1000µF and 10000µF. The default for
"range" is auto-range.
How to measure capacitance
1. Connect the test leads to the terminals on the front panel.
2. Press SHIFT + FREQ to select capacitance measurement function.
3. Observe and take readings on the display.

3.10 2ND Measurement

M3510A/11A provides a secondary measurement function as users make
a primary measurement. By using 2nd function, users are able to make
two measurements at the same time. The Table 3-1 and 3-2 below
show the available
measurement on M3510A and M3511A respectively.
In Short Condition
Figure 3-6
measurement functions
39 39 39 39
for each primary