System Related Operations; Display - Picotest M3510A User Manual

Note: To disable the dBm function, you always need to go to Math
※
submenu and select "OFF" or press other measurement buttons. The
"MATH" annunciator should not be lit when disabled.
Remote Interface Operation
Use the following commands to enable dBm feature or to set the
reference resistance:
CALCulate:FUNCtion DBM
CALCulate:STATe {OFF|ON}
CALCulate:STATe?
CALCulate:DBM:REFerence {<value>|MINimum|MAXimum}

4.4 System Related Operations

In M3510A/11A, each system related operation performs a task that is
not measurement related but plays an important role in making your
measurements.

4.4.1 Display

M3510A/11A has a dual-LCD-display screen. A maximum of 11
characters are allowed for upper row primary display and a maximum of
16 characters are allowed for lower row secondary display as shown on
Figure 4-5. You has an option to turn off the display for a faster
measurement without waiting for display, or when the measurement is
done through the remote interface operations on their PC terminal.
Figure 4-5
75 75 75 75