Connecting an ISDN BRI trunk
About this task
Connect the trunk to any ISDN port on an MM720, MM721 or MM722 media module.
Note:
In the US, you need to connect a separately purchased NT1 device to each ISDN port you
use to connect an ISDN BRI trunk.
Figure 18: The MM720 media module
Figure 19: The MM721 media module
Figure 20: The MM722 media module
Connecting devices to the MM717 and MM716 media modules
About this task
The MM716 and MM717 media modules each have a single 25-pair amphenol socket on the front
panel, intended for use with a punch down block.
Procedure
Connect the front panel connector to a punch down block.
You can terminate up to 24 endpoint devices on the connected punch down block.
October 2019
Deploying and Upgrading Avaya G450 Branch Gateway
Comments on this document? infodev@avaya.com
Connecting devices
47