Mellanox Technologies SB7700 User Manual page 37

Step a. Mark the GUID printed on the inventory pull-out tab of the system.
Step b. Run the command ibnetdiscover and search for the row starting with the word "Switch" and
indicates the GUID of the system.
Step c. Mark the displayed LID on that row (a decimal number).
Run the following command from a host
Step 2.
flint -d lid-[number] -i <image> b
For further information, please refer to MFT User Manual:
MFT_user_manual.pdf
http://www.mellanox.com/pdf/MFT/
Mellanox Technologies
Rev 1.2
37