Mellanox Technologies SB7700 User Manual page 57

1u edr 100gb/s infiniband switch systems
Hide thumbs Also See for SB7700:
Table of Contents

Advertisement

6. Stacking the Chassis
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
7. Redundant Power Supply Connection - Electrical Hazard
This product includes a redundant power or a blank in its place. In case of a blank
power supply, do not operate the product with the blank cover removed or not securely
fastened.
8. Multiple Power Inlets
Risk of electric shock and energy hazard.
The PSUs are all independent.
Disconnect all power supplies to ensure a powered down state inside of the switch
platform.
9. During Lightning - Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
10. Copper InfiniBand Cable Connecting/Disconnecting
Copper InfiniBand cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for spe-
cial warnings/instructions.
11. Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with equip-
ment starting from the bottom to the top.
12. Equipment Installation
This equipment should be installed, replaced, and/or serviced only by trained and qual-
ified personnel.
Mellanox Technologies
Rev 1.2
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb7790

Table of Contents