Chapter 2 Installation; Safety Warnings - Mellanox Technologies SB7700 User Manual

Rev 1.2
2 Installation
Installation and initialization of the system require attention to the normal mechanical, power,
and thermal precautions for rack-mounted equipment.
 The installation procedure for the system involves the following phases:
Follow the safety warnings in Section 2.1 on page 12
Step 1.
Pay attention to the air flow consideration within the system and rack - refer to "Air Flow" on
Step 2.
page 13
Make sure that none of the package contents is missing or damaged - see "Package Contents"
Step 3.
on page 14
Mount the system as suggested in "Mounting Options" on page 15
Step 4.
Power on the system - refer to "Initial Power On" on page 27
Step 5.
Perform system bring-up - see "Bring-Up of Managed Systems" on page 28
Step 6.
FRU replacements are described in Section 2.8 on page 32.
2.1

Safety Warnings

Prior to the installation, please review the safety warnings as follows:
• For Nordic Countries Notices, see Section E.1, "Nordic Countries Notices," on page 56.
• For Safety Warnings in English, see Section E.2, "Installation Safety Warnings
(English)," on page 56.
• For Safety Warnings in Hebrew, see Section E.3, "(‫ ",אזהרות בטיחות בהתקנה )עברית‬on
page 59.
• For Safety Warnings in Chinese, see Section E.4 on page 63.
• For Safety Warnings in French, see Section E.5, "Avertissements de sécurité pour
l'installation (French)," on page 66.
• For Safety Warnings in German, Section E.6, "Installation Sicherheitshinweise(Ger-
man)," on page 69.
• For Safety Warnings in Spanish, see Section E.7, "Advertencias de seguridad de insta-
lación (Spanish)," on page 73.
• For Safety Warnings in Russian, see Section E.8, "Предупреждения по технике
безопасности при установке (Russian)," on page 76.
• For Safety Warnings in Romanian, see Section E.9, "Avertismente privind siguranţa la
instalare (Romanian)," on page 79.
• For Safety Warnings in Croatian, see Section E.10, "Sigurnosna upozorenja za instali-
ranje (Croatian)," on page 83.
12
Mellanox Technologies
The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take
precautions to guarantee proper ventilation in order to maintain good airflow at ambi-
ent temperature.

Installation