Two: Connecting; Bench Test; Avertx Camera Finder; Finding Ip Cameras - avertX HD420 User Manual

Night vision hd indoor/outdoor ip mini bullet camera
Hide thumbs Also See for HD420:
Table of Contents

Advertisement

TWO: CONNECTING

BENCH TEST

AvertX recommends that you perform a bench test of your camera
before installation. This will confirm that your camera is functioning
correctly and familiarize yourself with the functions before it is installed
and possibly out of reach.
To bench test your camera, attach the camera network connector to
your recorder and test whether or not the camera is functioning
correctly. Once the camera is connected to the recorder, test all
functions (especially Auto Focus, Zoom, IR Night Vision) to ensure
proper operation.
If the camera will not connect or is not functioning correctly, do not
install and contact AvertX Support.

AvertX Camera Finder

The Camera Finder application is available to download at avertx.com.

Finding IP Cameras

1.
Open the folder where you downloaded Camera Finder.
2.
Click Camera Finder.
3.
Click Device Search on the Device Search window.
4.
If a Windows Security Alert window opens, click Unblock to allow
the IP utility to access your network.
5.
Click Device Search again to find all connected IP devices.
Tip The default IP address of your IP camera is 192.168.0.250
35156AA
Note
If you cannot connect to the camera you may need to change
the camera's IP address to match your network settings.

Accessing the Camera

You can view live video and access the camera configuration by
accessing the camera in an internet browser.
1.
Right-click the desired network device and select Browse.
2.
Type the default username and password in the login window to
access the video server using your internet browser.

Changing the IP Address

If you are not directly connecting to an AvertX HDIP recorder, you must
manually change the IP address. Change the IP address to a number in
the same subnet as your existing network or to the recommended
network settings for your network.
1.
Right-click the desired network device and then click Network
Setup.
2.
Select the Static IP option.
3.
Enter the new IP Address, Gateway, Netmask, and DNS for
camera.
The Mighty Squirrel Contr oller
13

Advertisement

Table of Contents
loading

Table of Contents