Viewing Device Status
You can view the current status of your camera.
•
Click Setup > Common > Basic Info.
•
Click Refresh for the latest status information.
•
View the device information.
35156AA
Upgrading the Device
New versions of camera firmware is available periodically and can be
found at http://www.avertx.com/product-downloads/.
Note:
Make sure the software upgrade file is available before
starting the software upgrade.
1.
Click Setup > System > Maintenance.
2.
Under Firmware Upgrade, click Browse and select the correct
upgrade file.
3.
(Optional) Select the check box to enable Upgrade Boot Program.
4.
Click Upgrade and then confirm to start. The camera will restart
automatically after the upgrade is completed.
Note:
You must use the correct upgrade file for you camera.
Otherwise, unexpected results may occur.
•
The upgrade file is a ZIP file and must include all the necessary
files.
•
The boot program loads the operating system and then the
system starts running. The upgrade boot program function is
disabled by default, and only the camera will be upgraded to
the latest version. If enabled, both the camera and the boot
program are upgraded, and the operating system of the
following new versions can be booted properly and the camera
can be upgraded conveniently.
38