E-Mail; Port Mapping - avertX HD420 User Manual

E-Mail

After the configuration of E-mail, when alarms are triggered, you will be
able to send messages to the specified E-mail address.
The camera can send an e-mail via Simple Mail Transfer Protocol
(SMTP) when a variety of events occur. SMTP is a protocol for sending
e-mail messages between servers. SMTP is a relatively simple, text-
based protocol, where one or more recipients of a message are
specified and the message text is transferred. Consult your email
provider to get your SMTP server information.
Three accounts can be configured. Each set includes, Account Name,
Password and E-mail Address settings. For SMTP server, contact your
network service provider for more specific information.
1. Click Setup > Network > E-mail.
2. Configure relevant parameters of the sender and the recipient The
following table describes some major parameters.
35156AA
Parameter Description
Attach Image When enabled, the e-mail will contain 3 instant
snapshots as attachment according to the Capture
Interval.
3. Click Save.

Port Mapping

1. Click Setup > Network > Port Mapping.
2. Enable Port Mapping and select mapping type. If Manual is
selected, then external ports must be configured (external IP is
obtained automatically by the camera). If the configured port is
occupied, then the Status will show Inactive.
3. Click Save.
24