Table of Contents
Advertisement
•
Ensure that the power supply is normal during upgrade.
The device will restart after the upgrade is completed.
Restarting the System
1.
Click Setup > System > Maintenance.
2.
Under Device Restart, click Restart. The device will restart after
you confirm the operation. You may also enable auto-restart by
selecting Enable Auto Restart and setting a time for auto-start.
The device will restart at the set time.
CAUTION!
Perform this operation with caution because restarting the
system interrupts the ongoing service.
Importing and Exporting System
Configuration File
Export the current configurations of the camera and save them to the
PC or an external storage medium. You can also quickly restore
configurations by importing backup configurations stored on the PC or
an external storage medium back to the camera.
CAUTION!
After you perform the Default operation, all settings are
restored to factory defaults, except the following: login
password of the system administrator, network settings,
and system time.
Make sure you import the correct configuration file for your
camera. Otherwise, unexpected results may occur. The
camera will restart when the configuration file is imported
successfully.
1.
Click Setup > System > Maintenance.
2.
To import configurations that you have backed up, click Browse
next to the Import button and select the configurations you want to
import, and then click Import. The result will be displayed.
3.
To export configurations, click Browse next to the Export button,
select the destination folder, and then click Export.
35156AA
4.
To restore default configurations, click Default and then confirm the
operation. The device will restart and restore the default
configurations.
39
Advertisement
Table of Contents
