avertX HD420 User Manual page 3

Precautions
Operating
•
Before using, make sure power supply and others are properly
connected.
•
While operating, if any abnormal condition or malfunction is
observed, stop using the camera immediately and then contact
AvertX Customer Support.
Handling
•
Do not disassemble or tamper with parts inside the camera.
•
Do not drop or subject the camera to shock and vibration as
this can damage camera.
•
Do not block the cooling holes on the bracket. This camera has
a cooling fan inside the housing. Blocking the cooling holes will
cause heat to build up and cause malfunction.
•
Care must be taken when you clean the clear lens cover.
Scratches and dust will ruin the image quality of your camera.
Do not use strong or abrasive detergents when cleaning the
camera body. Use a dry cloth to clean the camera when it is
dirty. In case the dirt is hard to remove, use a mild detergent
and wipe the camera gently.
Installation and Storage
•
Do not install the camera in areas of extreme temperatures in
excess of the allowable range. (-35°F~ 122°F / -37°C ~ 50°C)
•
Avoid installing in humid or dusty places. The relative humidity
must be below 90%.
•
Avoid installing in places where radiation is present.
•
Avoid installing in places where there are strong magnetic
fields and electric signals.
•
Avoid installing in places where the camera would be subject
to strong vibrations.
•
Never face the camera toward the sun. Do not aim at bright
objects. Whether the camera is in use or not, never aim it at
the sun or other extremely bright objects. Otherwise the
camera may be damaged.
35156AA
REGULATION
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste in accordance with
Directive 2002/96/EC. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment.
By proper waste handling of this product you ensure that it has no
negative consequences for the environment and human health, which
could otherwise be caused if this product is thrown into the garbage bin.
The recycling of materials will help to conserve natural resources.
For more details information about recycling of this product, please
contact your local city office, your household waste disposal service or
the shop where you purchased the product.
Compliance is evidenced by written declaration from our suppliers,
assuring that any potential trace contamination levels of restricted
substances are below the maximum level set by EU Directive
2002/95/EC, or are exempted due to their application.
WARNING
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
.
3