Dimensions
Length – 6.25" (157 mm)
Width – 2.5" (63 mm)
Height – 2.5" (63 mm)
35156AA
Connections
The HD420 cameras use Power over Ethernet (PoE). The only
connection on the camera is the RJ45 Ethernet dongle located on the
rear of the camera. Connect one end of the Ethernet cable to the
dongle, and connect the other end to the recorder, or to a PoE switch.
•
Protect the network cable connection from water damage by
running the cord inside a wall or ceiling, or through conduit.
•
If passing the cord through a wall or ceiling, drill a 3/4" hole.
•
For outdoor installations, seal any holes in the wall or ceiling with
silicone caulk to protect against water intrusion.
AvertX recommends using Category 5 Ethernet cable to connect the
camera to your network. For the best transmission quality, the cable
length should not exceed 328 feet (100 meters).
11