Table of Contents
Advertisement
VIDEO CONFIGURATION
Video Configuration
You can set video parameters that your camera. You may also enable
sub-stream.
After enabling the sub, modify the parameters as required. The
parameters for the sub and third stream have the same meanings as
that for the main stream.
1.
Click Setup > Video > Video.
2.
Modify the settings as required. The following table describes some
major parameters.
Parameter
Description
Bitrate Type
CBR: Constant Bit Rate, which means that the camera
transmits data at a constant data rate.
VBR: Variable Bit Rate, which means that the camera
adjusts the bit rate dynamically according to image
quality.
Frame Rate
Frame rate for encoding images. Unit: FPS (frame per
second).
Note:To ensure image quality the frame rate should not
be greater than the reciprocal of shutter speed.
Image Quality
When Encoding Mode is VBR, you can move the slider
to adjust quality level for images. Moving the slider
toward Bit Rate decreases the bit rate and may affect
image quality. Moving the slider toward Quality
Smoothing
Set the extent of smoothing. Choosing Clear means
disabling Smoothing. Moving the slider toward Smooth
increases the level of smoothing but will affect image
quality.
Note:In a poor network environment, you can enable
smoothing to get more fluent video.
3.
Click Save.
35156AA
Configuring Capture
With the function of capture configured, when an alarm is triggered, the
camera will automatically upload the captured snapshots to the FTP
server or send snapshots the specified email address.
1.
Click Setup > Video > Capture.
2.
Configure relevant parameters.
3.
Click Save.
25
Advertisement
Table of Contents
