Table of Contents
Advertisement
APR Binding
This function can protect the camera from ARP attacks. When the
camera visits an IP of another network segment via a gateway, it can
communicate only with the MAC address binding to the gateway
address in the same segment.
1.
Click Setup > System > Security > ARP Binding.
2.
Select the check box to enable the ARP binding function and set
the MAC address.
3.
Click Save.
Hide Vendor Information
You can set to hide the vendor information of the network camera on
the Web interface.
1.
Click Setup > System > Security.
2.
Under Registration Info, select Enable.
Video Watermark
You can set the video watermark for the camera to encrypt the video
and protect it from being deleted or modified.
1.
Click Setup > System > Security > Video Watermark.
2.
Select Enable and set the watermark content.
3.
Click Save.
35156AA
SYSTEM
Setting the System Time
You can use the following methods to adjust the system time of your
device.
Manually Setting or Synchronizing the System
Time
1.
Click Setup > Common > Time, and then click the Time tab.
2.
Select Enable for Client Time Synchronization.
3.
Click Save.
Synchronizing with the NTP Server
1.
Click Setup > Common > Time, and then click the Time tab.
2.
Select Enable for NTP, and then enter the IP address of the NTP
server and the camera's sync interval with the NTP server.
3.
Click Save. The camera will periodically synchronize time with the
NTP server.
Setting the DST
1.
Click Setup > Common > Time, and then click the DST tab.
2.
Select Enable DST, set the start time, end time, and DST bias.
3.
Click Save.
37
Advertisement
Table of Contents
