Table of Contents
Advertisement
Configuring Tampering Alarm
Configure tampering alarm so that the camera reports a tampering
alarm when the lens is blocked for a certain length of time.
1.
Click Setup > Events > Tampering Alarm.
2.
Select Enable for Tampering Alarm.
3.
Set detection sensitivity and duration for the camera to decide
whether to report a tampering alarm. The camera can be more
sensitive to the blocking even it only blocks the camera lens slightly
from a farther location when sensitivity is set to high. The camera
reports an alarm when the lens is blocked for a specified length of
time.
Tampering alarm is effective to the whole screen. To disable tampering
alarm, clear the Tampering Alarm check box.
35156AA
4.
Set actions to be triggered by tampering alarms and the plan. For
detailed steps, see the descriptions of alarm-triggered actions in
Configuring Motion Detection
5.
Click Save.
Alarm.
35
Advertisement
Table of Contents
