IEI Technology ECK-3692 User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Desktop
  5. ECK-3692
  6. User manual

IEI Technology ECK-3692 User Manual

High performance intel core 2 duo fanless system supports 7.1 channel hd audio, digital audio, dvi, component video, s-video and wireless lan
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ECK-3692G Embedded System
ECK-3692G Embedded System
Page i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECK-3692 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology ECK-3692

Summary of Contents for IEI Technology ECK-3692

  • Page 1 ECK-3692G Embedded System ECK-3692G Embedded System Page i...
  • Page 2 ECK-3692G Embedded System Revision Date Version Changes 2008-04 1.00 Initial Release Page ii...
  • Page 3 ECK-3692G Embedded System Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Page 4: Manual Conventions

    ECK-3692G Embedded System Manual Conventions WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. The word “warning” is written as “WARNING,” both capitalized and bold and is followed by text.
  • Page 5 ECK-3692G Embedded System CAUTION: This is an example of a caution message. Failure to adhere to cautions messages may result in permanent damage to the ECK-3692G. Please take caution messages seriously. NOTE: These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes.

  • Page 6: Packing List

    ECK-3692G Embedded System Packing List NOTE: If any of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the ECK-3692G from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw.

  • Page 7: Table Of Contents

    ECK-3692G Embedded System Table of Contents INTRODUCTION..................... 1 1.1 ECK-3692G E ............2 MBEDDED YSTEM VERVIEW 1.1.1 ECK-3692G Benefits..................2 1.1.2 ECK-3692G Features ..................2 1.2 ECK-3692G M ................3 ODEL ARIATION 1.3 T ..................4 ECHNICAL PECIFICATIONS 1.4 W LAN M ..................
  • Page 8 ECK-3692G Embedded System 3.4 G ....................22 RAPHICS UPPORT 3.5 E ............... 22 THERNET ONTROLLER PECIFICATIONS 3.5.1 Overview ......................22 3.5.2 Features ......................22 3.6 P ..............23 ERIPHERAL NTERFACE ONNECTORS 3.6.1 Peripheral Interface Connectors ..............23 3.6.2 External Interface Panel Connectors............... 23 3.7 M ..........
  • Page 9 ECK-3692G Embedded System 5.1 I ......................46 NTRODUCTION 5.1.1 Starting Setup....................46 5.1.2 Using Setup ...................... 46 5.1.3 Getting Help..................... 47 5.1.4 Unable to Reboot After Configuration Changes..........47 5.1.5 BIOS Menu Bar....................47 5.2 M ........................48 5.3 A .......................
  • Page 10 ECK-3692G Embedded System 6.6 R HD A (ALC883) I ......... 99 EALTEK UDIO RIVER NSTALLATION 6.6.1 BIOS Setup ....................... 99 6.6.2 Driver Installation ..................100 6.7 W LAN D ..................103 IRELESS RIVER TROUBLESHOOTING AND MAINTENANCE ..........107 7.1 A ..................
  • Page 11 ECK-3692G Embedded System B.1.2 IEI Embedded System Series ................. 128 B.1.3 IEI Embedded System Series Variations............129 B.2 E ................129 MBEDDED YSTEM OLUTIONS ® ® B.2.1 AMD Geode LX800 500MHz Solutions............. 129 ® ® B.2.2 AMD Geode GX466 333MHz Solutions............ 130 ®...
  • Page 12 ECK-3692G Embedded System List of Figures Figure 1-1: ECK-3692G Embedded System..............2 Figure 2-1: ECK-3692G Dimensions (mm) ..............12 Figure 2-2: ECK-3692G Front Panel ................13 Figure 2-3: ECK-3692G Rear Panel................14 Figure 2-4: Bottom Surface ..................15 Figure 2-5: Internal Overview..................16 Figure 3-1: PWI-9451 Jumper and Connector Locations ........18 Figure 3-2: ATX Power Connector Pinout Locations ..........25 Figure 3-3: Front Panel Connector Pinout Locations..........26 Figure 3-4: IDE Device Connector Locations ............27...
  • Page 13 ECK-3692G Embedded System Figure 6-7: Restart the Computer ................90 Figure 6-8: Starting Install Shield Wizard Screen ............91 Figure 6-9: Preparing Setup Screen ................92 Figure 6-10: VGA Driver Installation Welcome Screen..........92 Figure 6-11: VGA Driver License Agreement ............93 Figure 6-12: VGA Driver Installing Notice..............93 Figure 6-13: VGA Driver Installation Complete ............94 Figure 6-14: Intel®...
  • Page 14 ECK-3692G Embedded System Figure 7-6: Motherboard Connectors..............115 Figure 7-7: Heat Sink Retention Screws ..............116 Figure 7-8: Motherboard Retention Screws ............116 Figure 7-9: Bottom Surface Access Panel Retention Screws ......118 Figure 7-10: SO-DIMM Socket ................. 118 Figure 7-11: SO-DIMM Installation................119 Figure 7-12: Power Module Internal Connectors ..........
  • Page 15 ECK-3692G Embedded System List of Tables Table 1-1: Model Variation....................3 Table 1-2: Technical Specifications ................5 Table 1-3: Wireless Module Specifications ..............6 Table 1-4: DC-to-DC Power Module Specifications ...........7 Table 1-5: Power Adapter Specifications..............9 Table 3-1: Peripheral Interface Connectors..............23 Table 3-2: Rear Panel Connectors................24 Table 3-3: ATX Power Connector Pinouts ..............25 Table 3-4: Front Panel Connector Pinouts ...............26 Table 3-5: IDE Connector Pinouts ................28...
  • Page 16 ECK-3692G Embedded System List of BIOS Menus Menu 1: Main........................48 Menu 2: Advanced.......................50 Menu 3: CPU Configuration ..................51 Menu 4: IDE Configuration ..................52 Menu 5: IDE Master and IDE Slave Configuration ...........54 Menu 6: Super IO Configuration ................58 Menu 7: Hardware Health Configuration ..............60 Menu 8: ACPI Configuration ..................61 Menu 9:Advanced Power Management Configuration..........62 Menu 10: Remote Access Configuration [Advanced] ..........65...

  • Page 17: Introduction

    ECK-3692G Embedded System Chapter Introduction Page 1...

  • Page 18: Eck-3692G Embedded System Overview

    ECK-3692G Embedded System 1.1 ECK-3692G Embedded System Overview Figure 1-1: ECK-3692G Embedded System The ECK-3692G is an Intel® Core™ Duo/Celeron® M based embedded solution. The fanless motherboard has been optimized for multimedia applications that require minimum installation space. The PWI-9451 main board supports a full range of functions for an ATX-compatible industrial computer.

  • Page 19: Eck-3692G Model Variation

    ECK-3692G Embedded System RoHS compliant design Fanless system 1.66 GHz Intel® Core™ Duo/1.86 GHz Intel® Celeron® M CPU supported Built-in 802.11b/g wireless LAN module One DVD combo drive preinstalled One GbE RJ-45 connector supported Multiple display interfaces support including DVI, YPbPr and S-Video 7.1 channel HD audio and digital audio support 1.2 ECK-3692G Model Variation The ECK-3692G embedded system has one preinstalled 1 GB DDR2 memory module...

  • Page 20: Technical Specifications

    ECK-3692G Embedded System 1.3 Technical Specifications The specifications for the Intel based embedded systems are listed below. ECK-3692G 1.66 GHz Intel® Core™ Duo T2300E CPU with 2 MB L2 cache 1.86 GHz Intel® Celeron® M 440 CPU with 1 MB L2 cache GMCH: Intel®...

  • Page 21: Table 1-2: Technical Specifications

    ECK-3692G Embedded System External power adapter, input voltage: Power Supply 100V AC ~ 240V AC @ 47Hz ~ 63Hz, 80W 0ºC ~ 45ºC Operating Temperature Half-sine wave shock 3 G; 11 ms; 3 shocks per axis Operating Shock MIL-STD-810F 514.5C-1 Operating Vibration 3.2 kg / 5.8 kg Net Weight (NW/GW)

  • Page 22: Wireless Lan Module

    ECK-3692G Embedded System 1.4 Wireless LAN Module The ECK-3692G series models are preinstalled with a WCM6002 wireless Mini PCI card. The specifications for the wireless module are listed in Table 1-3: WCM6002 Wireless Card IEEE 802.11 b/g Standard Mini PCI Interface Ralink Controller Chip...

  • Page 23: Power Module Specifications

    ECK-3692G Embedded System 1.5 Power Module Specifications The ECK-3692G embedded system preinstalled an IEI IDD-12490A-D1 power module to support a 12V DC input. The specifications for the IDD-12490A-D1 are shown in Table 1-4. Model Name: IDD-12490A-D1 12 V DC Input Output: 10 A (pass thru.) 12 V...

  • Page 24: Power Adapter Specifications

    ECK-3692G Embedded System 1.6 Power Adapter Specifications The ECK-3692G series models are shipped with an 80 W power adapter. The specifications for the adapter are listed in Table 1-5: 12.0 V DC Nominal 11.4 V – 12.65 V Regulation 120 mV Output Ripple/Noise Min.

  • Page 25: Table 1-5: Power Adapter Specifications

    ECK-3692G Embedded System 100,000 hours of continuous operation at 25ºC MTBF Reliability 0.75mA max Leakage Current Table 1-5: Power Adapter Specifications Page 9...
  • Page 26 ECK-3692G Embedded System THIS PAGE IS INTENTIONALLY LEFT BLANK Page 10...

  • Page 27: Mechanical Description

    ECK-3692G Embedded System Chapter Mechanical Description Page 11...

  • Page 28: Eck-3692G Mechanical Overview

    ECK-3692G Embedded System 2.1 ECK-3692G Mechanical Overview The ECK-3692G RoHS compliant, Intel® Core™ Duo/Celeron® M fanless embedded system features industrial grade components that offer longer operating life, high shock/vibration resistance and endurance over a wide temperature range. The ECK-3692G combines these features in an aluminum enclosure designed for space critical applications that require low power consumption.

  • Page 29: External Overview

    ECK-3692G Embedded System 2.3 External Overview 2.3.1 Front Panel The front panel of the ECK-3692G contains two USB 2.0 ports, one HDD LED and one power button and provides access to the DVD combo drive as shown in Figure 2-3 below. Figure 2-2: ECK-3692G Front Panel 2.3.2 Rear Panel Overview The rear panel of the ECK-3692G contains all the external I/O interface connectors and...

  • Page 30: Figure 2-3: Eck-3692G Rear Panel

    ECK-3692G Embedded System Figure 2-3: ECK-3692G Rear Panel The front panel I/O connectors shown in Figure 2-3 are listed below: 1 x 12V DC inlet 6 x Audio jacks 3 x Component video (YPbPr) connectors 1 x Digital audio jack 1 x DVI connector 1 x FireWire connector 1 x RJ-45 GbE connector...

  • Page 31: Bottom Surface

    ECK-3692G Embedded System 2.3.3 Bottom Surface WARNING: Never remove the bottom access panel from the chassis while power is still being fed into the system. Before removing the bottom access panel, make sure the system has been turned off and all power connectors unplugged. The bottom surface of the ECK-3692G contains the SO-DIMM access panel.

  • Page 32: Figure 2-5: Internal Overview

    ECK-3692G Embedded System Except for the SO-DIMMs, all the components are accessed by removing the top cover. The SO-DIMMs are accessed through the bottom surface access panel. Figure 2-5: Internal Overview Page 16...

  • Page 33: System Components

    ECK-3692G Embedded System Chapter System Components Page 17...

  • Page 34: Eck-3692G Embedded System Motherboard

    ECK-3692G Embedded System 3.1 ECK-3692G Embedded System Motherboard 3.1.1 ECK-3692G Embedded System Motherboard NOTE: The jumpers and connectors shown in the section below are those jumpers and connectors that are relevant to the configuration and installation of the embedded system. For a complete list of jumpers and connectors on the PWI-9451 motherboard, please refer to the PWI-9451 user manual.

  • Page 35: Cpu Support

    ECK-3692G Embedded System 3.2 CPU Support NOTE: The ECK-3692G has a preinstalled 1.66 GHz Intel® Core™ Duo/1.86 GHz Intel® Celeron® M CPU on-board. If the CPU fails, the motherboard has to be replaced. Please contact the IEI reseller or vendor you purchased the ECK-3692G from or contact an IEI sales representative directly.

  • Page 36: Intel ® Celeron ® M Specifications

    ECK-3692G Embedded System Embedded lifecycle support protects system investment by enabling extended product availability for embedded and communications customers ® ® 3.2.2 Intel Celeron M Specifications The specifications for the Intel® Celeron® M processor are listed below Intel® Streaming SIMD Extensions accelerates 3D graphics performance, video decoding/encoding, and speech recognition.

  • Page 37: Intel Ich7M Southbridge Chipset

    ECK-3692G Embedded System 250 MHz core render clock and 200 MHz core display clock at 1.05 V core voltage Supports TV-Out, CRT and SDVO Chip-to-chip interface between (G)MCH and ICH Configurable as x2 or x4 DMI lanes DMI lane reversal support 32-bit downstream address Power Management ACPI S0, S3, S4, S5...

  • Page 38: Graphics Support

    ECK-3692G Embedded System 3.4 Graphics Support The graphics features listed below are all integrated on the Intel® 945GM Northbridge chipset. Analog CRT Integrated 400 MHz RAMDAC Analog monitor support up to QXGA Support for CRT hot plug TV-Out Three integrated 10-bit DACS MacroVision support Overscaling NTSC/PAL...

  • Page 39: Peripheral Interface Connectors

    ECK-3692G Embedded System Integrated Gigabit Ethernet Media Access Control (MAC) and Physical-Layer (PHY) functions 3.6 Peripheral Interface Connectors Section 3.6.1 lists all the peripheral interface connectors seen in Section 3.1.2. 3.6.1 Peripheral Interface Connectors Table 3-1 shows a list of the peripheral interface connectors on the PWI-9451 used for the ECK-3692G embedded system.

  • Page 40: Motherboard On-Board Connector Pinouts

    ECK-3692G Embedded System Digital audio and S-Video combo Audio jack RCA1 connector 4-pin S-Video connector DVI connector DVI connector Ethernet and USB combo connector RJ-45 connector USB port FireWire and USB combo connector 6-pin FireWire 400 connector USB port Table 3-2: Rear Panel Connectors 3.7 Motherboard On-board Connector Pinouts The following sections describe the motherboard pinouts and the embedded system components to which they have been connected.

  • Page 41: Front Panel Connector

    ECK-3692G Embedded System Figure 3-2: ATX Power Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION +3.3V +3.3V +3.3V -12V PS-ON PW-OK +VCC5SB FP22 Table 3-3: ATX Power Connector Pinouts 3.7.2 Front Panel Connector CN Label: 16-pin header (2x8) CN Type: See Figure 3-3 CN Location: Page 25...

  • Page 42: Figure 3-3: Front Panel Connector Pinout Locations

    ECK-3692G Embedded System See Table 3-4 CN Pinouts: The front panel connector connects to external switches and indicators to the embedded system. These indicators and switches include: Power button Reset button Power LED HDD LED Suspend LED Speaker Figure 3-3: Front Panel Connector Pinout Locations PIN NO.

  • Page 43: Ide Connector (40-Pin)

    ECK-3692G Embedded System 3.7.3 IDE Connector (40-pin) CN Label: IDE1 40-pin box header (2x20) CN Type: See Figure 3-4 CN Location: See Table 3-5 CN Pinouts: The 40-pin IDE device connector on the ECK-3692G connects to the preinstalled DVD combo drive.. Figure 3-4: IDE Device Connector Locations PIN NO.

  • Page 44: Serial Port Connector (Com 1)

    ECK-3692G Embedded System DATA 1 DATA 14 DATA 0 DATA 15 GROUND IDE DRQ GROUND IOW# GROUND IOR# GROUND IDE CHRDY GROUND IDE DACK GROUND–DEFAULT INTERRUPT HDC CS0# HDC CS1# HDD ACTIVE# GROUND Table 3-5: IDE Connector Pinouts 3.7.4 Serial Port Connector (COM 1) CN Label: COM1 10-pin header (2x5)

  • Page 45: Usb Connectors (Internal)

    ECK-3692G Embedded System Figure 3-5: COM 1 Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION Data Carrier Direct (DCD) Data Set Ready (DSR) Receive Data (RXD) Request To Send (RTS) Transmit Data (TXD) Clear To Send (CTS) Data Terminal Ready (DTR) Ring Indicator (RI) Ground (GND) Table 3-6: COM 1 Connector Pinouts...

  • Page 46: Motherboard On-Board Jumpers

    ECK-3692G Embedded System Figure 3-6: USB Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION USBVCC2 USBGND3 USBGND2 USBVCC3 Table 3-7: USB Port Connector Pinouts 3.8 Motherboard On-board Jumpers NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 47: Clear Cmos Jumper

    ECK-3692G Embedded System The PWI-9451 motherboard has one onboard jumper (Table 3-8). Description Label Type Clear CMOS 3-pin header Table 3-8: Jumpers 3.8.1 Clear CMOS Jumper Jumper Label: 3-pin header Jumper Type: See Table 3-9 Jumper Settings: See Figure 3-8 Jumper Location: If the ECK-3692G fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information.

  • Page 48: Power Module Connectors And Jumpers

    The location of the clear CMOS jumper is shown in Figure 3-8 below. Figure 3-8: Clear CMOS Jumper 3.9 Power Module Connectors and Jumpers The connectors listed in and shown in are on the IDD-12490A DC-to-DC power converter module and used in the ECK-3692 embedded system. Connector Type Label...

  • Page 49: Atx Mode Connector

    ECK-3692G Embedded System Figure 3-9: Power Module Connector Locations The pin outs for these connectors are listed in the sections below. 3.9.1 ATX Mode Connector The embedded system is configured in the ATX power mode. The ATX power mode connector, PW1, is directly connected to the ATX connector on the motherboard. PIN NO.

  • Page 50: Input Power Connector

    ECK-3692G Embedded System 3.9.2 Input Power Connector The input power connector, CN1, is connected directly to the rear panel power socket. Power is received in this connector from an external power source and fed into the system. PIN NO. Description Vin 12V Vin 12V Table 3-12: Input Power Connector Pinouts...

  • Page 51: Installation

    ECK-3692G Embedded System Chapter Installation Page 35...

  • Page 52: Anti-Static Precautions

    ECK-3692G Embedded System 4.1 Anti-static Precautions WARNING: If the following anti-static precautions are not followed, a user may be injured and the system irreparably damaged. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PWI-9451 motherboard and the power module. (Dry climates are especially susceptible to ESD.) It is therefore critical that whenever the ECK-3692G is opened and any electrical component handled, the following anti-static precautions are strictly adhered Wear an anti-static wristband: Wearing a simple anti-static wristband can...

  • Page 53: Unpacking

    ECK-3692G Embedded System Power the system upStep 0: Step 6: 4.2.2 Unpacking After the ECK-3692G is received make sure the following components are included in the package. If any of these components are missing, please contact the ECK-3692G reseller or vendor where it was purchased or contact an IEI sales representative immediately. Quantity Item Image...

  • Page 54: Top Cover Removal

    ECK-3692G Embedded System 4.2.3 Top Cover Removal Before the jumper settings can be configured, the top cover must be removed. To remove the top cover, please follow the steps below: Locate the top cover retention screws of the rear panel of the ECK-3692G. Step 1: Remove the two top cover retention screws (Figure 4-1).

  • Page 55: Configure The Jumper Settings

    ECK-3692G Embedded System 4.2.4 Configure the Jumper Settings To configure the jumper settings, please follow the steps below. Remove the top cover. See Section 4.2.3. Step 1: Locate the jumper settings on the embedded motherboard. See Section 3.7. Step 2: Make the jumper settings in accordance with the settings described and defined Step 3: in Section...

  • Page 56: Figure 4-4: Hdd Retention Screws

    ECK-3692G Embedded System Insert four retention screws from the bottom of the bracket to secure the HDD Step 4: with the bracket (Figure 4-4). Figure 4-4: HDD Retention Screws Connect the IDE/SATA cable from the rear of the HDD to the IDE/SATA Step 5: connector on the motherboard (Figure 4-5).

  • Page 57: Foot Pad Installation

    ECK-3692G Embedded System 4.2.6 Foot Pad Installation The ECK-3692G embedded system is shipped with four foot pads. To install the foot pads, follow the instructions below. Turn the ECK-3692G embedded system over. Step 1: Locate the four foot pad holes for the food pad in the bottom surface. Step 2: Tear off the food pad sticker.

  • Page 58: Power-On Procedure

    ECK-3692G Embedded System YPbPr devices can be connected to the system. The cable connection locations are shown in Figure 2-3. 4.3 Power-On Procedure 4.3.1 Installation Checklist WARNING: Make sure a power supply with the correct input voltage is being fed into the system.

  • Page 59: Figure 4-7: Power Button And Power Led

    ECK-3692G Embedded System Figure 4-7: Power Button and Power LED Page 43...
  • Page 60 ECK-3692G Embedded System THIS PAGE IS INTENTIONALLY LEFT BLANK Page 44...

  • Page 61: Ami Bios Setup

    ECK-3692G Embedded System Chapter AMI BIOS Setup Page 45...

  • Page 62: Introduction

    ECK-3692G Embedded System 5.1 Introduction A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.

  • Page 63: Getting Help

    ECK-3692G Embedded System F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 5-1: BIOS Navigation Keys 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the...

  • Page 64: Main

    ECK-3692G Embedded System 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS Menu 1: Main System Overview The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed.

  • Page 65: Advanced

    ECK-3692G Embedded System Count: The number of CPUs on the motherboard System Memory: Displays the auto-detected system memory. Lists memory size Size: The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.

  • Page 66: Cpu Configuration

    ECK-3692G Embedded System BIOS Menu 2: Advanced 5.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU. Page 50...

  • Page 67: Ide Configuration

    ECK-3692G Embedded System BIOS Menu 3: CPU Configuration The CPU Configuration menu (BIOS Menu 3) lists the following CPU details: Manufacturer: Lists the name of the CPU manufacturer Brand String: Lists the brand name of the CPU being used Frequency: Lists the CPU processing speed FSB Speed: Lists the FSB speed Cache L1: Lists the CPU L1 cache size Cache L2: Lists the CPU L2 cache size...

  • Page 68: Ata/Ide Configurations [Compatible]

    ECK-3692G Embedded System BIOS Menu 4: IDE Configuration ATA/IDE Configurations [Compatible] Use the ATA/IDE Configurations option to configure the ATA/IDE controller. Disables the on-board ATA/IDE controller. Disabled Configures the on-board ATA/IDE controller to be in Compatible EFAULT compatible mode. In this mode, a SATA channel will replace one of the IDE channels.

  • Page 69: Ide Master, Ide Slave

    ECK-3692G Embedded System Legacy IDE Channels [PATA Pri, SATA Sec] SATA Only PATA Pri, SATA Sec EFAULT PATA Only IDE Master and IDE Slave When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the status of the auto detected IDE devices. The following IDE devices are detected and are shown in the IDE Configuration menu: Primary IDE Master Primary IDE Slave...

  • Page 70: Type [Auto]

    ECK-3692G Embedded System BIOS Menu 5: IDE Master and IDE Slave Configuration Type [Auto] Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from after the Power-On Self-Test (POST) is complete. BIOS is prevented from searching for an IDE disk Not Installed drive on the specified channel.

  • Page 71: Zip

    ECK-3692G Embedded System IDE disk drives on the specified channel. This option specifies an ATAPI Removable Media ARMD Device. These include, but are not limited to: LS-120 LBA/Large Mode [Auto] Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Addressing).

  • Page 72: Pio Mode [Auto]

    ECK-3692G Embedded System PIO Mode [Auto] Use the PIO Mode option to select the IDE PIO (Programmable I/O) mode program timing cycles between the IDE drive and the programmable IDE controller. As the PIO mode increases, the cycle time decreases. BIOS auto detects the PIO mode.

  • Page 73: Auto]

    ECK-3692G Embedded System Multi Word DMA mode 0 selected with a maximum data MWDMA0 transfer rate of 4.2MBps Multi Word DMA mode 1 selected with a maximum data MWDMA1 transfer rate of 13.3MBps Multi Word DMA mode 2 selected with a maximum data MWDMA2 transfer rate of 16.6MBps Ultra DMA mode 0 selected with a maximum data transfer...

  • Page 74: Super Io Configuration

    ECK-3692G Embedded System BIOS auto detects HDD SMART support. Auto EFAULT Prevents BIOS from using the HDD SMART feature. Disabled Allows BIOS to use the HDD SMART feature Enabled 32Bit Data Transfer [Enabled] Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers. Prevents the BIOS from using 32-bit data transfers.

  • Page 75: Hardware Health Configuration

    ECK-3692G Embedded System Serial Port1 Address [3F8/IRQ4] Use the Serial Port1 Address option to select the Serial Port 1 base address. No base address is assigned to Serial Port 1 Disabled Serial Port 1 I/O port address is 3F8 and the interrupt 3F8/IRQ4 EFAULT address is IRQ4...
  • Page 76 ECK-3692G Embedded System BIOS Menu 7: Hardware Health Configuration The following system parameters and values are shown. The system parameters that are monitored are: System Temperatures: The following system temperatures are monitored CPU Temperature System Temperature 1 Fan Speeds: The following cooling fan speeds are monitored. CPU Fan Speed System Fan Speed Voltages: The following system voltages are monitored...

  • Page 77: Acpi Configuration

    ECK-3692G Embedded System 1.05V 5VSB VBAT 5.3.5 ACPI Configuration The ACPI Configuration menu (BIOS Menu 8) configures the Advanced Configuration and Power Interface (ACPI) and Power Management (APM) options. BIOS Menu 8: ACPI Configuration Suspend Mode [S1(POS)] Use the Suspend Mode option to specify the sleep state the system enters when it is not being used.

  • Page 78: Apm Configuration

    ECK-3692G Embedded System System appears off. The CPU has no power; RAM is in S3 (STR) slow refresh; the power supply is in a reduced power mode. 5.3.6 APM Configuration The APM Configuration menu (BIOS Menu 9) allows the advanced power management options to be configured.

  • Page 79: Power Button Mode [On/Off]

    ECK-3692G Embedded System An ATX power supply is connected to the system ATX power EFAULT Power Button Mode [On/Off] The Power Button Mode BIOS specifies how the power button functions. When the power button is pressed the system is either On/Off EFAULT turned on or off...

  • Page 80: Resume On Keyboard/Mouse [Disabled]

    ECK-3692G Embedded System Resume on KeyBoard/Mouse [Disabled] The Resume on KeyBoard/Mouse BIOS option specifies if the system is roused from a suspended or standby state when there is activity on the keyboard or mouse. Wake event not generated by keyboard/mouse Disabled EFAULT activity...

  • Page 81: Remote Access Configuration

    ECK-3692G Embedded System RTC Alarm Date (Days) System Time After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 5.3.7 Remote Access Configuration Use the Remote Access Configuration menu (BIOS Menu 10) to configure remote access parameters.

  • Page 82: Remote Access [Disabled]

    ECK-3692G Embedded System Remote Access [Disabled] Use the Remote Access option to enable or disable access to the remote functionalities of the system. Remote access is disabled. Disabled EFAULT Remote access configuration options shown below Enabled appear: Serial Port Number Serial Port Mode Redirection after BIOS POST Terminal Type...

  • Page 83: Redirection After Bios Post [Always]

    ECK-3692G Embedded System 115200 8,n,1 D EFAULT 57600 8,n,1 38400 8,n,1 19200 8,n,1 09600 8,n,1 NOTE: Identical baud rate setting musts be set on the host (a management computer running a terminal software) and the slave Redirection After BIOS POST [Always] Use the Redirection After BIOS POST option to specify when console redirection should occur.

  • Page 84: Usb Configuration

    ECK-3692G Embedded System 5.3.8 USB Configuration Use the USB Configuration menu (BIOS Menu 11) to read USB configuration information and configure the USB settings. BIOS Menu 11: USB Configuration USB Configuration The USB Configuration field shows the system USB configuration. The items listed are: Module Version: x.xxxxx.xxxxx USB Devices Enabled The USB Devices Enabled field lists the USB devices that are enabled on the system...

  • Page 85: Usb 2.0 Controller [Enabled]

    ECK-3692G Embedded System USB function support disabled Disabled USB function support enabled Enabled EFAULT USB 2.0 Controller [Enabled] Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller USB 2.0 controller disabled Disabled USB 2.0 controller enabled Enabled EFAULT Legacy USB Support [Enabled]...

  • Page 86: Pci/Pnp

    ECK-3692G Embedded System 5.4 PCI/PnP Use the PCI/PnP menu (BIOS Menu 12) to configure advanced PCI and PnP settings. WARNING! Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction. BIOS Menu 12: PCI/PnP Configuration IRQ# [Available] Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device.

  • Page 87: Dma Channel# [Available]

    ECK-3692G Embedded System The specified IRQ is available to be used by Available EFAULT PCI/PnP devices The specified IRQ is reserved for use by Legacy ISA Reserved devices Available IRQ addresses are: IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available]...

  • Page 88: Boot

    ECK-3692G Embedded System DM Channel 7 Reserved Memory Size [Disabled] Use the Reserved Memory Size BIOS option to specify the amount of memory that should be reserved for legacy ISA devices. No memory block reserved for legacy ISA devices Disabled EFAULT 16KB reserved for legacy ISA devices 32KB reserved for legacy ISA devices...

  • Page 89: Boot Settings Configuration

    ECK-3692G Embedded System 5.5.1 Boot Settings Configuration Use the Boot Settings Configuration menu (BIOS Menu 14) to configure advanced system boot options. BIOS Menu 14: Boot Settings Configuration Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. No POST procedures are skipped Disabled Some POST procedures are skipped to decrease...

  • Page 90: Addon Rom Display Mode [Force Bios]

    ECK-3692G Embedded System Normal POST messages displayed Disabled EFAULT OEM Logo displayed instead of POST messages Enabled AddOn ROM Display Mode [Force BIOS] Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory) messages to be displayed. The system forces third party BIOS to display Force BIOS EFAULT...

  • Page 91: Boot Device Priority

    ECK-3692G Embedded System Boot From LAN Support [Disabled] Use the BOOT From LAN Support option to enable the system to be booted from a remote system. Cannot be booted from a remote system through the Disabled EFAULT Can be booted from a remote system through the Enabled 5.5.2 Boot Device Priority Use the Boot Device Priority menu (BIOS Menu 15) to specify the boot sequence from...

  • Page 92: Hard Disk Drives

    ECK-3692G Embedded System 5.5.3 Hard Disk Drives Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. When the menu is opened, the HDDs connected to the system are listed as shown below: 1st Drive [HDD: PM-(part number)] NOTE: Only the drives connected to the system are shown.

  • Page 93: Security

    ECK-3692G Embedded System 5.6 Security Use the Security menu (BIOS Menu 17) to set system and user passwords. BIOS Menu 17: Security Change Supervisor Password Use the Change Supervisor Password to set or change a supervisor password. The default for this option is Not Installed. If a supervisor password must be installed, select this field and enter the password.

  • Page 94: Chipset

    ECK-3692G Embedded System 5.7 Chipset Use the Chipset menu (BIOS Menu 18) to access the NorthBridge and SouthBridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. BIOS Menu 18: Chipset Page 78...

  • Page 95: Northbridge Configuration

    ECK-3692G Embedded System 5.7.1 NorthBridge Configuration Use the Northbridge Chipset Configuration menu (BIOS Menu 19) to configure the Northbridge chipset. BIOS Menu 19:Northbridge Chipset Configuration Memory Hole [Disabled] Use the Memory Hole option to reserve memory space between 15MB and 16MB for ISA expansion cards that require a specified area of memory to work properly.

  • Page 96: Video Function Configuration

    ECK-3692G Embedded System Internal Graphics Mode Select [Enable, 8MB] Use the Internal Graphic Mode Select option to specify the amount of system memory that can be used by the Internal graphics device. Disable 1MB of memory used by internal graphics device Enable, 1MB 8MB of memory used by internal graphics device Enable, 8MB...

  • Page 97: Southbridge Configuration

    ECK-3692G Embedded System Mode or Fixed Mode is selected in the DVMT Mode Select option. If Combo Mode is selected, the maximum amount of graphics memory is 128MB. Configuration options are listed below. 64MB 128MB EFAULT Maximum DVMT Boot Display Device [Auto] Use the Boot Display Device option to select the display device used by the system when it boots.

  • Page 98: Audio Controller [Azalia]

    ECK-3692G Embedded System BIOS Menu 20:Southbridge Chipset Configuration Audio Controller [Azalia] Use the Audio Controller option to enable or disable the Intel High Definition Audio. The onboard Intel High Definition Audio controller Azalia EFAULT automatically detected and enabled The onboard Intel High Definition Audio controller is Disabled disabled Onboard LAN [Enabled]...

  • Page 99: Exit

    ECK-3692G Embedded System enabled 5.8 Exit Use the Exit menu (BIOS Menu 21) to load default BIOS values, optimal failsafe values and to save configuration changes. BIOS Menu 21:Exit Save Changes and Exit Use the Save Changes and Exit option to save the changes made to the BIOS options and to exit the BIOS configuration setup program.

  • Page 100: Discard Changes

    ECK-3692G Embedded System Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program. Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the parameters on the Setup menus.

  • Page 101: Driver Installation

    ECK-3692G Embedded System Chapter Driver Installation Page 85...

  • Page 102: Available Software Drivers

    ECK-3692G Embedded System 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The ECK-3692G motherboard has the following software drivers: Intel Chipset Driver Installation VGA Utilities Driver...

  • Page 103: Figure 6-1: Introduction Screen

    ECK-3692G Embedded System The driver main menu appears (Figure 6-1). Step 2: Figure 6-1: Introduction Screen Click ECK-3692G. Step 3: A new screen with a list of available drivers appears (Figure 6-2). Step 4: Figure 6-2: Available Drivers Page 87...

  • Page 104: Chipset Driver Installation

    ECK-3692G Embedded System Select the driver to install from the list in Figure 6-2. Detailed driver installation Step 5: instructions follow below. Step 0: 6.3 Chipset Driver Installation To install the chipset driver, please follow the steps below: Select ECK-3692G from the list in Figure 6-1. Step 1: Select INF from the list in Figure 6-2.

  • Page 105: Figure 6-4: Welcome Screen

    ECK-3692G Embedded System Figure 6-4: Welcome Screen Click “N ” and the license agreement shown in Figure 6-5 appears. Step 6: Figure 6-5: License Agreement Agree to the license terms by clicking “Y ”. The “Readme” in Figure 6-6 Step 7: appears.

  • Page 106: Figure 6-6: Readme Information

    ECK-3692G Embedded System Figure 6-6: Readme Information Click “Y ”. The driver is installed on the computer. After the installation is Step 8: complete, the installation complete screen shown in Figure 6-7 appears. Select the preferred option and click “F ”...

  • Page 107: Vga Driver

    ECK-3692G Embedded System 6.4 VGA Driver To install the VGA driver, please follow the steps below: Select ECK-3692G from the list in Figure 6-1. Step 1: Select VGA from the list in Figure 6-2. Step 2: Open the X:\2-VGA\WinXP-2000\1420 directory (where X:\ is the system CD Step 3: drive) and double-click the win2k_xp1420.exe installation file.

  • Page 108: Figure 6-9: Preparing Setup Screen

    ECK-3692G Embedded System Figure 6-9: Preparing Setup Screen A Welcome screen shown in Figure 6-10 appears. Click N to continue the Step 6: installation. Figure 6-10: VGA Driver Installation Welcome Screen A license agreement shown in Figure 6-11 appears. Read through the license Step 7: Page 92...

  • Page 109: Figure 6-11: Vga Driver License Agreement

    ECK-3692G Embedded System agreement. Figure 6-11: VGA Driver License Agreement Accept the terms and conditions stipulated in the license agreement by clicking Step 8: the “Y ” button (Figure 6-11). The installation notice shown in Figure 6-12 appears. Figure 6-12: VGA Driver Installing Notice After the driver installation process is complete, a confirmation screen shown in Step 9: Figure 6-13 appears.

  • Page 110: Intel® 82573 Pci Express Gigabit Ethernet Controller Driver

    ECK-3692G Embedded System Figure 6-13: VGA Driver Installation Complete The confirmation screen shown in Figure 6-13 allows user to restart the Step 10: computer immediately after the installation is complete or to restart the computer later. For the settings to take effect the computer must be restarted. Once decided when to restart the computer, click the “F ”...

  • Page 111: Figure 6-14: Intel® 82573 Driver Startup Icon

    ECK-3692G Embedded System Figure 6-14: Intel® 82573 Driver Startup Icon Click the startup icon in Figure 6-14. Step 4: The License Agreement for the Intel® 82573 appears. See Figure 6-15. Step 5: Figure 6-15: Intel® 82573 License Agreement Accept the license terms and agreements in and click N to continue.

  • Page 112: Figure 6-16: Intel® 82573 File Location Select

    ECK-3692G Embedded System Figure 6-16: Intel® 82573 File Location Select Click N to continue. Step 8: The driver begins to extract the installation files. See Figure 6-17. Step 9: Figure 6-17: Intel® 82573 Installation Files Extraction The Intel® PRO Network Connections window appears. See Figure 6-18. Step 10: Page 96...

  • Page 113: Figure 6-18: Intel® Pro Network Connections Window

    ECK-3692G Embedded System Figure 6-18: Intel® PRO Network Connections window Click I in Figure 6-18. Step 11: NSTALL RIVERS The Intel® PRO Network Connections Welcome screen in Figure 6-19 Step 12: appears. Figure 6-19: Intel® PRO Network Connections Welcome Click N to continue.

  • Page 114: Figure 6-20: License Agreement

    ECK-3692G Embedded System A new License Agreement appears. See Figure 6-20. Step 14: Figure 6-20: License Agreement Accept the terms and conditions in Figure 6-20 and click N to continue. Step 15: The Setup Type window in Figure 6-21 appears. Step 16: Figure 6-21: Setup Type Select the setup type in Figure 6-21 and click N...

  • Page 115: Realtek Hd Audio Driver (Alc883) Installation

    ECK-3692G Embedded System The drivers are installed. See Figure 6-22. Step 18: Figure 6-22: Intel® 82573 Driver Installation Progress When the driver is installed. Click F in the termination screen. Step 19: Step 0: INISH 6.6 Realtek HD Audio Driver (ALC883) Installation To install the Realtek High Definition (HD) Audio driver, please follow the steps below.

  • Page 116: Driver Installation

    ECK-3692G Embedded System 6.6.2 Driver Installation To install the audio driver please follow the steps below. Select AUDIO from the list in Figure 6-2. Step 1: Open the X:\4.AUDIO\WinXP-2000\ALC880(D) directory (where X:\ is the Step 2: system CD drive) and double-click the WDM_R130.exe installation file. The InstallShield Wizard starts (Figure 6-23).

  • Page 117: Figure 6-25: Installshield Wizard Welcome Screen

    ECK-3692G Embedded System Figure 6-25: InstallShield Wizard Welcome Screen Click N to continue the installation. Step 6: InstallShield starts to install the new software as shown in Figure 6-26. Step 7: Figure 6-26: Audio Driver Software Configuration The Installation Wizard updates the system as shown in Figure 6-27. Step 8: Page 101...

  • Page 118: Figure 6-27: Installation Wizard Updates The System

    ECK-3692G Embedded System Figure 6-27: Installation Wizard Updates the System After the driver installation process is complete, a confirmation screen appears Step 9: (Figure 6-28). Figure 6-28: Restart the Computer The confirmation screen offers the option of restarting the computer now or later. Step 10: For the settings to take effect, the computer must be restarted.

  • Page 119: Wireless Lan Driver

    ECK-3692G Embedded System restart the computer. Step 0: 6.7 Wireless LAN Driver To install the Wireless LAN driver, please follow the steps below. Select WLAN from the list in Figure 6-2. Step 1: Open the X:\WLAN\RT2561_WCM6002\WCM6002_WinXp\ Step 2: WCM6002_WM3210 directory (where X:\ is the system CD drive). Click the WCM6002_WM3210_1.1.1.0.exe icon in Figure 6-14.

  • Page 120: Figure 6-30: Wireless Configuration Tool Selection

    ECK-3692G Embedded System Figure 6-30: Wireless Configuration Tool Selection The Choose Configuration TxBurst or WiFi window in Figure 6-21 appears. Step 7: Figure 6-31: Wirless LAN Configuration Mode Selection Select the configuration mode in Figure 6-21 and click N to continue. Step 8: The drivers are installed.

  • Page 121: Figure 6-32: Wireless Lan Driver Installation Progress

    ECK-3692G Embedded System Figure 6-32: Wireless LAN Driver Installation Progress When the driver is installed. Click F in the termination screen. Step 10: INISH Step 0: Figure 6-33: Wireless LAN Driver Installation Page 105...
  • Page 122 ECK-3692G Embedded System THIS PAGE IS INTENTIONALLY LEFT BLANK Page 106...

  • Page 123: Troubleshooting And Maintenance

    ECK-3692G Embedded System Chapter Troubleshooting and Maintenance Page 107...

  • Page 124: Anti - Static Precautions

    ECK-3692G Embedded System WARNING: Take Anti-Static precautions whenever maintenance is being carried out on the embedded system components. Failure to take anti-static precautions can cause permanent embedded system damage. 7.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the ECK-3692G may result in permanent damage to the ECK-3692G and severe injury to the user.

  • Page 125: Eck-3692G Embedded System Maintenance Overview

    ECK-3692G Embedded System 7.2 ECK-3692G Embedded System Maintenance Overview NOTE: When doing maintenance operations on the embedded system, please follow the instructions in this chapter. Failure to follow these instructions may lead to personal injury and embedded system damage. To preserve the working integrity of the ECK-3692G embedded system, the embedded system must be properly maintained.

  • Page 126: The Embedded System Doesn't Boot Up

    ECK-3692G Embedded System If the above steps have been completed and the embedded system still doesn’t turn on, please do the following. Open the top cover Step 1: Check the power socket power cable connector is properly connected to the Step 2: power module.

  • Page 127: Component Replacement Procedure

    ECK-3692G Embedded System 7.4 Component Replacement Procedure WARNING: Take Anti-Static precautions whenever maintenance is being carried out on the embedded system components. Failure to take anti-static precautions can cause permanent embedded system damage. The embedded system components listed below can all be replaced if they fail: DVD combo drive Motherboard Power module...

  • Page 128: Dvd Combo Drive Replacement

    ECK-3692G Embedded System Figure 7-1: Top Cover Rear Panel Retention Screws Slide the top cover and remove the top cover off the ECK-3692G. Step 3: Step 0: Figure 7-2: Top Cover Removal 7.4.2 DVD Combo Drive Replacement DVD combo drive replacement includes the following two procedures: Removing the malfunction DVD combo drive Step 1: Installing the replacement DVD combo...

  • Page 129: Figure 7-3: Dvd Bracket Retention Screws

    ECK-3692G Embedded System Remove the DVD bracket by removing the four retention screws. Step 3: Figure 7-3: DVD Bracket Retention Screws If there is a HDD installed, remove the HDD first. Step 4: Remove the IDE cable and DVD power cable from the rear of the DVD combo Step 5: drive.

  • Page 130: Dvd Combo Drive Installation

    ECK-3692G Embedded System from the DVD drive (Figure 7-5). Step 0: Figure 7-5: DVD Adapter Retention Screws 7.4.2.2 DVD Combo Drive Installation To install the new DVD combo drive, please follow the steps below. Install the new DVD adapter to the rear of the DVD drive (Figure 7-5). Step 1: Connect the IDE and power cables to the DVD adapter.

  • Page 131: Figure 7-6: Motherboard Connectors

    ECK-3692G Embedded System Remove the top cover. See Section 7.4.1. Step 2: Remove the following connector cables (Figure 7-6): Step 3: ATX power connector Front panel connector IDE connector Serial port connector SATA connector USB connector Figure 7-6: Motherboard Connectors Remove the wireless module from the motherboard (Figure 7-6).

  • Page 132: Figure 7-7: Heat Sink Retention Screws

    ECK-3692G Embedded System Figure 7-7: Heat Sink Retention Screws Remove the four retention screws that secure the motherboard to the embedded Step 6: system. (See Figure 7-8) Figure 7-8: Motherboard Retention Screws Remove the motherboard and the copper heat sink. Step 7: Remove the SO-DIMM from the solder side of the motherboard.Step 0:...

  • Page 133: Motherboard Installation

    ECK-3692G Embedded System 7.4.3.2 Motherboard Installation To install the new motherboard or reinstall the old motherboard, please follow the steps below. Install the previously removed wireless module. Step 1: Install (see below) the previously installed SO-DIMM (if it is a new one) or a new Step 2: SO-DIMM (if is a replacement SO-DIMM).

  • Page 134: So-Dimm Replacement

    ECK-3692G Embedded System 7.4.4 SO-DIMM Replacement To replace a SO-DIMM, please follow the installation procedures that follow: Remove the bottom surface access panel by remove the two retention screws Step 1: (Figure 7-9). Figure 7-9: Bottom Surface Access Panel Retention Screws Locate the preinstalled SO-DIMM (Figure 7-10).

  • Page 135: Power Module Replacement

    ECK-3692G Embedded System Remove the old SO-DIMM from the socket. Step 3: Align the new SO-DIMM with the socket (Figure 7-11). Step 4: Figure 7-11: SO-DIMM Installation Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle. (See Step 5: Figure 7-11) Open the SO-DIMM socket arms.

  • Page 136: Figure 7-12: Power Module Internal Connectors

    ECK-3692G Embedded System Remove the top cover. See Section 7.4.1. Step 3: Remove the HDD/DVD bracket. See Section 7.4.2.1. Step 4: Remove the following connector cables (See Figure 7-12): Step 5: ATX power connector Power input connector Power output connector Figure 7-12: Power Module Internal Connectors Remove the four retention screws that secure the power module to the Step 6:...

  • Page 137: Power Module Installation

    ECK-3692G Embedded System Remove the power module.Step 0: Step 7: 7.4.5.2 Power Module Installation To install the new power module, please follow the steps below. Install the new power module into the embedded system. Step 1: Reinsert the four, previously removed power module retention screws Step 2: (Figure 7-12).
  • Page 138 ECK-3692G Embedded System THIS PAGE IS INTENTIONALLY LEFT BLANK Page 122...

  • Page 139: Asafety Precautions

    ECK-3692G Embedded System Appendix Safety Precautions Page 123...

  • Page 140: Safety Precautions

    ECK-3692G Embedded System WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the ECK-3692G. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.

  • Page 141: Anti-Static Precautions

    ECK-3692G Embedded System A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the ECK-3692G may result in permanent damage to the ECK-3692G and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ECK-3692G.

  • Page 142: Cleaning Tools

    ECK-3692G Embedded System The interior of the ECK-3692G does not require cleaning. Keep fluids away from the ECK-3692G interior. Be cautious of all small removable components when vacuuming the ECK-3692G. Turn the ECK-3692G off before cleaning the ECK-3692G. Never drop any objects or liquids through the openings of the ECK-3692G. Be cautious of any possible allergic reactions to solvents or chemicals used when cleaning the ECK-3692G.

  • Page 143: Iei Embedded System Series

    ECK-3692G Embedded System Appendix IEI Embedded System Series Page 127...

  • Page 144: Iei Embedded

    ECK-3692G Embedded System B.1 IEI Embedded System Series B.1.1 Overview IEI embedded industrial PC systems are ideal for manufacturing and automation environments where heavy processing demands exist. These systems are designed to operate effectively within high-stress environments that have diverse operational conditions.

  • Page 145: Iei Embedded System Series Variations

    ECK-3692G Embedded System B.1.3 IEI Embedded System Series Variations The differences between the series are listed below. Motherboard Cooling CompactFlash Drive Bays ECW-180A WAFER Two cooling fans One CF slot None ECW-180B WAFER Fanless One CF slot None ECW-181A WAFER Two cooling fans One CF slot Two 2.5”...

  • Page 146: Amd ® Geode

    ECK-3692G Embedded System Model Number System Chipset DC Input Drive Bays ® ECW-180BS1 CS5536 None None ® ECW-180BS1WD CS5536 9V ~ 36V None None ® ECW-181AS1 CS5536 Two 2.5” HDD ECW-181AS1WD ® CS5536 9V ~ 36V Two 2.5” HDD ® ECW-181BS1 CS5536 None...

  • Page 147: Via Mark 800Mhz Solutions

    ECK-3692G Embedded System Model Number System Chipset DC Input Drive Bays ® ECW-180BS3WD VT8237R+ 9V ~ 36V None None ® ECW-181AS3 VT8237R+ Two 2.5” HDD ® ECW-181AS3WD VT8237R+ 9V ~ 36V Two 2.5” HDD ECW-181BS3 ® VT8237R+ None Two 2.5” HDD ®...

  • Page 148: Intel Celeron M 1 Ghz Solutions

    ECK-3692G Embedded System ® ® B.2.6 Intel Celeron M 1 GHz Solutions ® ® The model listed in the table below support an Intel Celeron M 1 GHz zero cache CPU. Model Number System Chipset DC Input Drive Bays ECW-281BB6 Intel®...

  • Page 149: Intel Pentium M 1.6Ghz Solutions

    ECK-3692G Embedded System ® ® B.2.8 Intel Pentium M 1.6GHz Solutions ® ® All the models listed in the table below support an Intel Pentium M 1.6GHz CPU. Model Number System Chipset DC Input Drive Bays ECN-171BSE0-PM16G Intel® 852GM + ICH4 None None ECN-171BSE0-WD-PM16G...

  • Page 150: Lga 775 Intel ® Pentium

    ECK-3692G Embedded System ® ® ® B.2.10 LGA 775 Intel Pentium 4/ Pentium D Solutions ® ® ® All the models listed in the table below support a LGA 775 Intel Pentium 4/ Pentium CPU. Model Number System Chipset DC Input Drive Bays ECK-3699GE Intel...

  • Page 151: Cbios Menu Options

    ECK-3692G Embedded System Appendix BIOS Menu Options Page 135...

  • Page 152: Bios Configuration Options

    ECK-3692G Embedded System C.1 BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 5. 　 System Overview ....................48 　 System Time [xx:xx:xx]..................49 　 System Date [xx/xx/xx]..................49 　 ATA/IDE Configurations [Compatible]..............52 　 Legacy IDE Channels [PATA Pri, SATA Sec]............53 　...
  • Page 153 ECK-3692G Embedded System 　 Serial Port Number ....................66 　 Serial Port Mode.....................66 　 Redirection after BIOS POST................66 　 Terminal Type......................66 　 Serial Port Number [COM1] ..................66 　 Base Address, IRQ [3F8h, 4].................66 　 Serial Port Mode [115200 8,n,1]................66 　 Redirection After BIOS POST [Always] ...............67 　...
  • Page 154 ECK-3692G Embedded System 　 Onboard LAN [Enabled] ..................82 　 Save Changes and Exit ..................83 　 Discard Changes and Exit ..................83 　 Discard Changes....................84 　 Load Optimal Defaults...................84 　 Load Failsafe Defaults...................84 Page 138...

  • Page 155: Dwatchdog Timer

    ECK-3692G Embedded System Appendix Watchdog Timer Page 139...
  • Page 156 ECK-3692G Embedded System NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.

  • Page 157: Example Program

    ECK-3692G Embedded System NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
  • Page 158 ECK-3692G Embedded System THIS PAGE IS INTENTIONALLY LEFT BLANK Page 142...

  • Page 159: Eaddress Mapping

    ECK-3692G Embedded System Appendix Address Mapping Page 143...

  • Page 160: Io Address Map

    ECK-3692G Embedded System E.1 IO Address Map I/O address Description Range 000-01F DMA Controller 020-021 Interrupt Controller 040-043 System time 060-06F Keyboard Controller 070-07F System CMOS/Real time Clock 080-09F DMA Controller 0A0-0A1 Interrupt Controller 0C0-0DF DMA Controller 0F0-0FF Numeric data processor 1F0-1F7 Primary IDE Channel 3B0-3BB...

  • Page 161: St Mb Memory Address Map

    ECK-3692G Embedded System E.2 1st MB Memory Address Map Memory address Description 00000-9FFFF System memory A0000-BFFFF VGA buffer F0000-FFFFF System BIOS 1000000- Extend BIOS Table E-2: 1 MB Memory Address Map E.3 IRQ Mapping Table IRQ0 System Timer IRQ8 RTC clock IRQ1 Keyboard IRQ9...
  • Page 162 ECK-3692G Embedded System THIS PAGE IS INTENTIONALLY LEFT BLANK Page 146...

  • Page 163: Hazardous Materials Disclosure

    ECK-3692G Embedded System Appendix Hazardous Materials Disclosure Page 147...

  • Page 164: Hazardous Material Disclosure Table For Ipb Products Certified As Rohs Compliant Under 2002/95/Ec Without Mercury

    ECK-3692G Embedded System F.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 165 ECK-3692G Embedded System Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Hg) (Cd) Chromium (Pb) Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies Battery O: This toxic or hazardous substance is contained in all of the homogeneous materials for the part is below...
  • Page 166 ECK-3692G Embedded System 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。 Page 150...

  • Page 167: Index

    ECK-3692G Embedded System Index Page 151...
  • Page 168 ECK-3692G Embedded System serial port (COM 1) ........28 １ USB (internal) ........29 12V DC input ..........7 cooling fan..........60 CPU Support..........19 Ａ Ｄ ACPI ............61 ALC883............86 DC input ............7 ATX ............24 DC-to-DC power converters ......32 anti-static precautions......108 DDR2 ............20 anti-static pad ......108, 125 Digital audio ........
  • Page 169 ECK-3692G Embedded System Ｈ Ｐ HDTV ............22 PCI ............21, 22 High Definition Audio .........21 power adapter ..........8 power button ..........26 Ｉ Power Button Mode ........63 power connector ........34 I/O interface connectors, external....13 power LED ..........26 ICH7M..........20, 21 power module replacement .....119 IDE connector, 40-pin ........27 Power-On Procedure .........42 location and pinouts ......27...
  • Page 170 ECK-3692G Embedded System top cover ............38 USB 2.0......... 21, 29, 69 troubleshooting ........109 Ｗ TV-Out ..........21, 22 Wireless LANvi, vii, x, xiii, 6, 15, 86, 103, 105 Ｕ Wireless LAN module ........15 unpacking ..........37 Wireless Module ..........6 USB .........29, 30, 68, 69 Ｙ...

Table of Contents