Power Input 1, 3-Pin Terminal Block; Power Input 2, Din Connector; Rs-232 Serial Port; Figure 3-19: 3-Pin Terminal Block Pinouts - IEI Technology UPC-V312-D525 User Manual

UPC-V312-D525 Panel PC

3.7.7 Power Input 1, 3-pin Terminal Block

CN Label: POWER 1
3-pin terminal block
CN Type:
See Figure 1-4
CN Location:
See Figure 3-25
CN Pinouts:
Connect the leads of a 9V~36V DC power supply into the terminal block. Make sure that
the power and ground wires are attached to the correct sockets of the connector.
Figure 3-25: 3-pin Terminal Block Pinouts

3.7.8 Power Input 2, DIN Connector

CN Label: POWER 2
DIN connector
CN Type:
See Figure 1-4
CN Location:
The power connector connects to the 10.5 V ~ 36 V DC power adapter.
3.7.9 RJ-45 RS-232 Serial Port
CN Label: RS 232
RJ-45
CN Type:
See Figure 1-4
CN Location:
See Table 3-3 and Figure 3-26
CN Pinouts:
A RS-232 serial port device can be connected to the RJ-45 RS-232 serial port on the
bottom panel. The pinouts of the RJ-45 RS-232 serial port is shown below.
Page 37