The Power-Up Configuration
When you power on the printer for the first time, it loads configuration 0, the
factory default configuration.
If you save a configuration, such as configuration 1, and turn the power off
and then back on, the printer will load the designated power-up
configuration, not the last saved configuration.
For your convenience, you can specify which configuration (0-8) should be
the power-up configuration.
Note
In order to select a power-up configuration, it must be saved first. Otherwise,
the message "CONFIG. DOES NOT EXIST/Save First" displays.
1.
Press ON LINE to place the printer offline. Open the printer cover.
2.
Press
"UNLOCKED" displays briefly.
3.
Press
4.
Press
5.
Press
OFFLINE
CONFIG. CONTROL
=
>
+
simultaneously to unlock the control panel. The message
ENTER SWITCH
UNLOCKED
OFFLINE
CONFIG. CONTROL
>
.
CONFIG. CONTROL
Load Config.
<
repeatedly until you reach the Power-Up Config. parameter.
CONFIG. CONTROL
Power-Up Config.
>
.
Power-Up Config.
0*
The Power-Up Configuration
69