Introduction
This section contains general information about this guide, the FOX T UWP 302 Universal
Wallplate Transmitter, and selected device features. Topics in this section include:
•
•
•
About this Guide
This guide describes installation, operation, and control procedures, and reference
information for the FOX T UWP 302 Universal Wallplate Transmitter. In this guide,
"FOX T UWP 302" refers to the FOX T UWP 302 Universal Wallplate Transmitter in
singlemode or multimode.
About the FOX T UWP 302
The Extron FOX T UWP 302 is a three-gang universal wallplate transmitter with a two input
integrated switcher that provides long haul transmission of HDCP-compliant HDMI, RGBHV,
or HD component video; stereo audio; and RS-232 signals over fiber optic cabling. It
delivers pixel-for-pixel transmission of images up to 1920x1200 and 2K, including HDTV
1080p @ 60 Hz.
To configure and control the FOX T UWP 302, connect a host device, such as a computer,
and enter Simple Instruction Set (SIS) commands (see
on page 15) or use the FOX Extenders Control Program (see
Program
WARNING:
AVERTISSEMENT: Risque potentiel de blessure grave ou de mort. Le
About this Guide
About the FOX T UWP 302
Key Features
on page 23).
Potential risk of severe injury. The FOX T UWP 302 outputs continuous
invisible light, which may be harmful to the eyes; use with caution.
FOX T UWP 302 émet une lumière invisible en continu qui peut être dangereux pour
les yeux, à utiliser avec précaution.
•
Do not look into the rear panel iber optic cable connectors or into the iber optic
cables themselves.
•
Ne regardez pas dans les connecteurs de câble ibre optique sur le panneau arrière
ou dans les câbles ibre optique eux-mêmes.
•
Plug the attached dust caps into the optical transceivers when the iber cable is
unplugged.
•
Branchez les protections contre la poussière dans l'ensemble émetteur/récepteur
lorsque le câble ibre optique est débranché.
SIS Configuration and Control
FOX T UWP 302 Wallplate Transmitter • Introduction
FOX Extenders Control
1